Streszczenie treści zawartej na stronie nr. 1
POWER LEADER™
PMCS 6.8 for
©
CIMPLICITY HMI
Interface Toolkit
User’s Guide
DEH-210
GE Power Management Control System 6.8
Streszczenie treści zawartej na stronie nr. 2
Notice The information contained in this document is subject to change without notice. GE makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. GE shall not be liable for errors contained herein or incidental consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information which is protected by copyright.
Streszczenie treści zawartej na stronie nr. 3
Contents Introduction 1 Welcome..............................................................................................................................1 How should I use this manual?..............................................................................................2 Conventions .........................................................................................................................3 About the Interface Toolkit......................................................
Streszczenie treści zawartej na stronie nr. 4
Sample Application 59 Creating a basic interface....................................................................................................59 Features of GE Large Faceplate Wizards 63 About the Large Faceplate Wizards.....................................................................................63 POWER LEADER EPM.....................................................................................................64 ® Spectra MicroVersaTrip Trip Unit................................
Streszczenie treści zawartej na stronie nr. 5
Demand Tab ....................................................................................................... 141 Inputs Tab........................................................................................................... 142 Setup 1 Tab......................................................................................................... 143 Setup 2 Tab......................................................................................................... 145 Universal Relay..
Streszczenie treści zawartej na stronie nr. 6
Appendix A: EPM 3720 Sliding Window Demand Keys 195 Downloading Sliding Demand Window Keys to the EPM 3720.........................................195 Appendix B: Automatic Waveform Capture and Waveform Retrieval on EPM 3720 201 Using a setpoint to trigger waveform capture or record on the EPM 3720 .......................... 201 Index 215 iv • Contents PMCS Interface Toolkit
Streszczenie treści zawartej na stronie nr. 7
Introduction Welcome The PMCS Interface Toolkit is a POWER LEADER Power Management Control System (PMCS) tool that provides a custom toolkit to efficiently create flexible, accurate, and friendly user interfaces to your power management data. With the PMCS Wizards (accurate graphical representations of power management devices and other commonly encountered objects), you can create applications to provide a customized interface that accurately represents physical, electrical, and geographical pl
Streszczenie treści zawartej na stronie nr. 8
representations of power management devices, complete with working controls that are linked to the corresponding devices in your facility. • Chapter 6 describes the Tabular Data wizards. These wizards list the data and setpoints of power management devices in a tabular format. Simply point and click to select the appropriate tab of information to display and view the related data. The examples and references in this guide enable you to create custom interfaces for your PMCS system, and allow you
Streszczenie treści zawartej na stronie nr. 9
• Boldface type indicates the name of an item you need to select. • Monospace type indicates an example or text that is displayed on the screen. • UPPERCASE type indicates a file name, command name, or acronym. About the Interface Toolkit The Interface Toolkit consists of the CIMPLICITY HMI development environment and a special set of wizards developed for use with the power management devices supported by PMCS 6.8. PMCS Interface Toolkit Introduction • 3
Streszczenie treści zawartej na stronie nr. 10
Installation To install the Interface Toolkit from the CD-ROM, refer to the instructions provided in DEH-211, the PMCS Read This Book First. When installing CIMPLICITY HMI 4.01, be sure to include the Advanced DDE Communications" option. For PMCS View Nodes, be sure to install the appropriate PMCS software to support CIMPLICITY wizard operation. A runtime view node installation provides files needed to operate the wizards, the wizard help files, and the EventViewer and Waveform client applicatio
Streszczenie treści zawartej na stronie nr. 11
Configuring and Using PMCS Wizards About the Wizards The wizards contained in the PMCS Interface Toolkit allow you to quickly build accurate and friendly user interfaces with CIMPLICITY HMI. In addition to the various wizards standard with CIMPLICITY HMI development systems, the User Screen Configurator provides five types of powerful GE wizards: • GE Small Faceplate Wizards • GE Large Faceplate/Tabular Data Wizards • GE One-Line Tool Wizards • GE Elevation Wizards • GE Floor Plan Wizards PMCS I
Streszczenie treści zawartej na stronie nr. 12
Configuring a CIMPLICITY Project for PMCS Using the wizards is straightforward. The procedure outlined in this section describes how to place and configure a PMCS wizard in CIMPLICITY HMI. Later sections describe using/testing a wizard and go further into describing each kind of wizard. 1. From CIMPLICITY HMI, create a new project by clicking the New Project button or selecting File: New Project. The New Project window appears: 2. Enter the Project Name and select a directory where the project s
Streszczenie treści zawartej na stronie nr. 13
3. In the Project Properties window (Options tab), select the Enable project broadcast checkbox if you will be using CIMPLICITY HMI view nodes. Make sure the Computer name field matches the name of the host machine. Disregard the Startup Timeout field and the General tab. Select OK to open the CIMPLICITY HMI Project Wizard: 4. In the CIMPLICITY Project Wizard step 1 of 3 window, choose Finish to complete the project setup. 5. The CIMPLICITY Workbench is displayed as shown below: Double-click PMC
Streszczenie treści zawartej na stronie nr. 14
PMCS PowerBuilder - Configuring Advanced Wizards PMCS Power Builder is a powerful tool to drastical reduce development time, enabling you to quickly and easily add many devices to a new CIMPLICITY project. Besides enhancing your productivity as a developer, PMCS Power Builder also allows you to create more efficient applications which use fewer system resources and enjoy greater performance. This is due to PMCS Power Builder's integration with the PMCS Advanced Wizards. These wizards employ tech
Streszczenie treści zawartej na stronie nr. 15
Add Device – use this button to create a new device in your application. You can also add a device by double clicking any empty line in the device information section of the PowerBuilder screen, or right clicking and selecting "Add" from the drop down menu. Modify Selected – use this button to change the Description, Resource, and application information for an existing (selected) device. You can also modify a device’s configuration by double-clicking a listed device, or by right-clicking an exi
Streszczenie treści zawartej na stronie nr. 16
Device Configuration Dialog - most PMCS Advanced Wizards Select a Device Type from the pulldown menu and enter the device's name in the Device Name field. Enter a description (optional). Select a Resource from the pulldown menu. Complete the Application Name field with ION_LINK. Complete the Node Name field with the name of the computer running the Comm Server connected to this particular device. Complete the Gateway Name field with GE77GTWY. See the following note for details. Device Configurat
Streszczenie treści zawartej na stronie nr. 17
Choose the desired tabs to display on the Wizard, and use the right and left arrow buttons to move the desired tabs from the Available Tabs box to the Selected Tabs box. Device Configuration Dialog - 369 Complete the Application Name field; typically GE32MODB, but if UCA/MMS is selected, enter AXS4MMS or name of MMS Server. Select the Model of UR which you are configuring. This determines the contents of the Available Tabs list. Use the right and left arrow buttons to move the highlighted tabs b
Streszczenie treści zawartej na stronie nr. 18
When you are done adding devices, you can generate the screens for all devices in one step by choosing the Generate Screens button. The PMCS Power Builder tool creates one tabular screen per device type and one small faceplate per individual device, following the many-to-one architecture of the PMCS Advanced Wizards. Note: While PMCS Power Builder can generate screens for most of the PMCS Advanced wizards, there are some exceptions. The Annunciator Panel and the EPM7700 screens are not automatic
Streszczenie treści zawartej na stronie nr. 19
For the highly-flexible UR and 369 type devices, Power Builder creates a blank "framework" wizard, with no pre-drawn tabs. In CimEdit the wizard will show no tabs - the tabs will be dynamically redrawn based on the physical device being accessed. For example, if you use different models of the Universal Relay in your application, you might need to display a unique set of tabs for each type of relay. With dynamic redraw, you only need a single tabular wizard in your project to show any combinatio
Streszczenie treści zawartej na stronie nr. 20
Device Configuration - Special Considerations for EPM 7700 only The EPM 7700 Device Configuration dialog box contains two extra fields, which must be completed during configuration. The Node Name field requires that you enter the name of the computer running the Communications Server that connects to this particular device. Depending on the configuration of the EPM 7700 network, this can be either the Primary node computer, or a computer setup as a "Full Station" Secondary node. Refer to DEH-400
