Streszczenie treści zawartej na stronie nr. 1
USER’S GUIDE
®
MegaRAID SATA 150
Storage Adapters
July 2006
Version 1.5
®
P/N: 80-00152-01 Rev. A
Streszczenie treści zawartej na stronie nr. 2
Electromagnetic Compatibility Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro
Streszczenie treści zawartej na stronie nr. 3
This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. 2 Purchase of I C components of LSI Logic
Streszczenie treści zawartej na stronie nr. 4
iv Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
Streszczenie treści zawartej na stronie nr. 5
Preface ® This book is the user’s guide for the MegaRAID SATA 150 storage adapters. It contains complete physical installation instructions, as well as physical and electrical specifications, for the SATA 150 storage adapters. Audience This document assumes that you have some familiarity with RAID controllers and related support devices. The people who benefit from this book are: • Anyone installing an SATA 150 storage adapter in a host system • Engineers who are designing an SATA 150 stora
Streszczenie treści zawartej na stronie nr. 6
storage adapters. This chapter also provides the mechanical drawing, jumper definitions, and connector locations for the SATA 150 storage adapters. • Appendix A, Glossary of Terms, defines terms and abbreviations that are used in this manual. • Appendix B, MegaRAID Problem Report Form, provides forms to send or fax to LSI Logic if you encounter difficulty with your SATA 150 storage adapter. MegaRAID System Installation Sequences and Document Organization The following table outlines the ins
Streszczenie treści zawartej na stronie nr. 7
Related Publications MegaRAID Device Driver Installation User’s Guide Document Number: DB11-000018-02 This document explains how to install the MegaRAID device driver for your operating system. The information in this document is independent of the back-end bus and applies to both MegaRAID SCSI storage adapters and Serial ATA storage adapters. MegaRAID Configuration Software User’s Guide Document Number: DB15-000269-01 This document explains how to use the RAID system configuration, monitori
Streszczenie treści zawartej na stronie nr. 8
Revision Date Remarks 1.1 April 2003 Added the MegaRAID SATA 150-4 RAID Storage Adapter (RSA). 1.0 December 2002 Initial release of this document. viii Preface Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
Streszczenie treści zawartej na stronie nr. 9
Contents Chapter 1 Introduction 1.1 Overview of Main Adapter Features 1-1 1.1.1 Enclosure Management 1-2 1.1.2 Patrol Read 1-2 1.1.3 SMART Technology 1-2 1.1.4 Alarm Beep Codes 1-3 1.1.5 Drive Roaming and Drive Migration 1-4 1.1.6 Logical Drive Deletion 1-4 1.1.7 Background Initialization 1-5 1.1.8 Operating System Support 1-5 1.1.9 Technical Support 1-6 1.2 SATA 150 Storage Adapter Characteristics 1-6 1.2.1 Hardware and Software Characteristics 1-7 1.2.2 Software Utility Support 1-8 Chapter 2 H
Streszczenie treści zawartej na stronie nr. 10
3.1.2 MegaRAID SATA 150-4 3-4 3.1.3 MegaRAID SATA 150-2 3-6 3.2 Physical and Environmental Specifications 3-8 3.2.1 Electrical Characteristics 3-8 3.2.2 Thermal and Atmospheric Characteristics 3-8 3.2.3 Safety Characteristics 3-9 Appendix A Glossary of Terms Appendix B MegaRAID Problem Report Form Customer Feedback xContents Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
Streszczenie treści zawartej na stronie nr. 11
Figures 2.1 Inserting the SATA 150 Storage Adapter in a PCI Slot 2-4 3.1 SATA 150-6 Board Layout 3-3 3.2 SATA 150-4 Board Layout 3-5 3.3 SATA 150-2 Board Layout 3-7 Contents xi Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
Streszczenie treści zawartej na stronie nr. 12
xii Contents Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
Streszczenie treści zawartej na stronie nr. 13
Tables 1.1 Alarm Beep Codes 1-3 1.2 SATA 150 Board Characteristics 1-7 3.1 MegaRAID SATA 150 Characteristics 3-1 3.2 SATA 150-6 Connector and Jumper Description 3-3 3.3 SATA 150-4 Connector and Jumper Description 3-5 3.4 SATA 150-2 Connector Definitions 3-7 3.5 Maximum Power Requirements 3-8 B.1 Customer Information B-1 B.2 System and Problem Information B-2 B.3 MegaRAID Array and Logical Device Configuration B-3 Contents xiii Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
Streszczenie treści zawartej na stronie nr. 14
xiv Contents Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
Streszczenie treści zawartej na stronie nr. 15
Chapter 1 Introduction This chapter introduces the MegaRAID SATA 150 PCI to Serial ATA storage adapters and consists of the following sections: • Section 1.1, “Overview of Main Adapter Features” • Section 1.2, “SATA 150 Storage Adapter Characteristics” 1.1 Overview of Main Adapter Features The MegaRAID SATA 150 storage adapters provide a high-performance Intelligent PCI to High Speed Serialized AT Attachment (PCI-to-Serial ATA) interface with RAID control capabilities. These storage adapters
Streszczenie treści zawartej na stronie nr. 16
management capabilities. The SATA 150-6 supports RAID 0, 1, 5, 10, and 50. • The MegaRAID SATA 150-4 intelligent RAID controller and storage adapter uses two Silicon Image SiI3112A chips to support four Serial ATA ports. The Intel 80302 processor provides the intelligent RAID management capabilities. The SATA 150-4 supports RAID 0, 1, 5, and 10. • The MegaRAID SATA 150-2 RAID controller and storage adapter uses a Silicon Image SiI3112A chip to support two Serial ATA ports. The SATA 150-2
Streszczenie treści zawartej na stronie nr. 17
SMART-compliant physical disks have attributes for which data (values) can be monitored to identify changes in values and determine whether the values are within threshold limits. Many mechanical failures and some electrical failures display some degradation in performance before failure There are numerous factors that relate to predictable physical disk failures, such as a bearing failure, a broken read/write head, and changes in spin-up rate. In addition, there are factors related to re
Streszczenie treści zawartej na stronie nr. 18
1.1.5 Drive Roaming and Drive Migration Note: Drive roaming and drive migration cannot be supported at the same time. One or the other feature can be supported at any one time, but not both features at the same time. Drive roaming (also known as configuration on disk) occurs when the hard drives are moved to different channels on the same controller and the controller detects the RAID configuration from the configuration information on the drives. Configuration data is saved in both non-vol
Streszczenie treści zawartej na stronie nr. 19
Please note the following: • You cannot delete a logical drive during a reconstruction. Also, you cannot delete a logical drive during a rebuild, initialization, or check consistency of a logical drive, if that drive has a higher logical drive number than the drive you want to delete. You must wait until these processes have completed before deleting the logical drive. • Drive size extension is not possible, even though you can use non- contiguous free space to create a new logical drive. •
Streszczenie treści zawartej na stronie nr. 20
Refer to the MegaRAID Device Driver Installation User’s Guide on the Universal Driver Suite CD for information about installing the device drivers. Be sure to use the latest Service Packs provided by the operating system manufacturer and review the readme file that accompanies the driver. ® Note: The SATA 150 adapters do not support the Windows NT operating system. See the LSI Logic web site for the latest operating systems and drivers. 1.1.9 Technical Support For assistance installing, co
