Instrukcja obsługi Weil-McLain GOLD CGt SERIES

Streszczenie treści zawartej na stronie nr. 1

CGt SERIES BOILER

SUGGESTED SPECIFICATIONS









I. General Requirements

A. Furnish and install ( ) low pressure packaged cast iron sectional boiler(s) that
operate under induced draft.

B. Install boiler-burner unit(s) in compliance with manufacturers installation instructions.
All work must be done in a neat and workman like manner.

C. Weil-McLain qty.( ) CGt ( ) PIN boiler(s) capable of burning natural gas at 5 to
13”w.c.

1. Packaged boiler (standard).
2.

Streszczenie treści zawartej na stronie nr. 2

A. Acceptable boiler/burner manufacturer(s) include(s): 1. Weil-McLain only, as specified in Part 1, Paragraph C. a) Other manufacturer(s) or other Weil-McLain boiler(s) must comply with specifying engineer’s requirements, including: Full intent of these specifications, and provide complete submittal including literature, wiring diagrams, fuel piping diagrams, and a list of similar installations. b) Submittal to be presented to specifying engineer at least seven working days for

Streszczenie treści zawartej na stronie nr. 3

a) Water boiler(s) controls furnished: 1) High temperature limit setting to be 140 – 240 degrees. 2) Combination pressure-temperature gauge with dial clearly marked and easy to read, installed with well for removal without draining the boiler. 3) ASME certified pressure relief valve, set to relieve at 30 PSIG. Optional relief valves available up to and including maximum allowable pressure. Side outlet discharge type; contractor to pipe outlet to floor drain or near floor, avoiding any ar