Streszczenie treści zawartej na stronie nr. 1
R
P2B-D2
®
Dual Pentium II Motherboard
USER’S MANUAL
Streszczenie treści zawartej na stronie nr. 2
USER'S NOTICE No part of this manual, including the products and software described in it, may be repro- duced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup pur- poses, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
Streszczenie treści zawartej na stronie nr. 3
ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. Marketing Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw Technical Support Fax: +886-2-2895-9254 BBS: +886-2-2896-4667 Email: tsd@asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL Marketing Address: 6737 Mowry Avenue, Mowry Business Center, Building 2 Newark, CA 94560, USA Fax: +1-510-608-4555 Email: info-usa@asus.com.tw Technical
Streszczenie treści zawartej na stronie nr. 4
CONTENTS I. INTRODUCTION.............................................................................. 7 How this Manual is Organized ........................................................... 7 Item Checklist ..................................................................................... 7 II. FEATURES ....................................................................................... 8 Features .......................................................................................
Streszczenie treści zawartej na stronie nr. 5
CONTENTS Chipset Features Setup ................................................................ 48 Details of Chipset Features Setup.......................................... 48 Power Management Setup........................................................... 51 Details of Power Management Setup .................................... 51 PNP and PCI Setup ..................................................................... 54 Details of PNP and PCI Setup ..........................................
Streszczenie treści zawartej na stronie nr. 6
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
Streszczenie treści zawartej na stronie nr. 7
I. INTRODUCTION How this Manual is Organized This manual is divided into the following sections: I. Introduction Manual information and checklist II. Features Information and specifications III. Installation Setting up the motherboard and jumpers IV. BIOS Software Setting up the BIOS software V. Support CD Information on the included support software Item Checklist Check that your package is complete. If you discover damaged or missing items, contact your retailer. (1) ASUS Motherboard (2) Proc
Streszczenie treści zawartej na stronie nr. 8
II. FEATURES Specifications II. FEATURES Features The ASUS P2B-D2 motherboard is carefully designed for the demanding PC user who wants advanced features processed by the fastest CPU. ® • Multi-Speed: Supports Dual Intel Pentium II processors from 233MHz to 450MHz. • I2O: Includes Intel’s i960RD I/O processor with 32KB NVRAM, 4x512KB Flash EEPROM, and 2 SIMM slots for up to 256MB of memory. • Intel Chipset: Features Intel’s 440BX AGPset with I/O subsystems and front-side bus (FSB) platform, w
Streszczenie treści zawartej na stronie nr. 9
II. FEATURES The ASUS P2B-D2 Motherboard Wide SCSI Connector Intel 440BX T: PS/2 Mouse ATX Power Narrow SCSI Connector AGPset B: PS/2 Keyboard SEC CPU Slots 4 DIMM Sockets AT Power T: USB Conn 1 B: USB Conn 2 Serial COM 1 Parallel Conn VGA Connector LAN Conn. (RJ-45) Adaptec AIC-7890 SCSI Chipset COM 2 Floppy Conn. 3 PCI Slots Multi-I/O Chip 3 Secondary PCI Slots Programmable 2Mbit Flash EEPROM ISA Slot NVRAM i960 Firmware Intel i960RD S3 Trio64V2/DX Intel LAN 2 SIMM Sockets Ultra2 SCSI Connect
Streszczenie treści zawartej na stronie nr. 10
35 68 1 34 35 68 1 34 III. INSTALLATION Board Layout III. INSTALLATION The ASUS P2B-D2 Motherboard Layout Top: Mouse Bottom: PS/2 Keyboard ATXPWR Top: Single Edge Contact Slot 1 (for Pentium II processor) USB 1 USB CHA _FAN Bottom: P10 USB 2 PWR-CON2 COM 1 PWR_FAN Intel 440BX PWRCON AGPset J1601 CPU Heat Sensor CPU_FAN VGA 50-pin Narrow SCSI Connector Connector RJ-45 Single Edge Contact Slot 1 (for Pentium II processor) Floppy 512KB DRAM 512KB DRAM upgrade socket Adaptec upgrade socket 7890 S3
Streszczenie treści zawartej na stronie nr. 11
III. INSTALLATION Jumpers 1) CLRTC p. 13 Clear Real Time Clock (RTC) RAM 2) 960SEL p. 13 i960 Setting (I2O/Bridge) 3) DRAMRAS p. 13 i960RD DRAM RAS Setting (Single/Double) 4) FS0, FS1, FS2 p. 14 CPU Bus Frequency 5) BF0, BF1, BF2, BF3 p. 14 CPU Core:Bus Frequency Multiple 6) JP1601 p. 15 Chassis Intrusion Sensor Setting (Enable/Disable) 7) LAN_EN p. 15 LAN Setting (Enable/Disable) 8) SCSI_EN p. 15 SCSI Setting (Enable/Disable) Expansion Slots/Sockets 1) DIMM1-4 p. 16 DIMM System Memory Sockets 2
Streszczenie treści zawartej na stronie nr. 12
III. INSTALLATION Jumpers III. INSTALLATION Installation Steps Before using your computer, you must complete the following steps: 1. Set Jumpers on the Motherboard 2. Install System Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Cabinet Wires, and Power Supply 6. Setup the BIOS Software 1. Jumpers Several hardware settings are made through the use of jumper caps to connect jumper pins (JP) on the motherboard. See motherboard lay
Streszczenie treści zawartej na stronie nr. 13
III. INSTALLATION Jumper Settings 1. Clear Real Time Clock (RTC) RAM (CLRTC) The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Turn off your computer and unplug its AC power, (2) Short the two solder points labeled CLRTC, (3) Turn on your computer, (4) Hold down during bootup and enter BIOS setup to re-enter user preferences. Short the solder points to clear CMOS P2B-D2 Real Time Clock RAM (CLRTC) 2. i960 Bridge Setting The secondary PCI slots can f
Streszczenie treści zawartej na stronie nr. 14
III. INSTALLATION Jumpers III. INSTALLATION 4. CPU Bus Frequency (FS0, FS1, FS2) This option tells the clock generator what frequency to send to the CPU, DRAM, and 440BX AGPset. This allows the selection of the CPU’s External frequency (or BUS Clock). The BUS Clock multiplied by the BUS Ratio equals the CPU’s Internal fre- quency (the advertised CPU speed). 5. CPU Core:BUS Frequency Multiple (BF0, BF1, BF2, BF3) This option sets the frequency multiple between the Internal frequency of the CPU
Streszczenie treści zawartej na stronie nr. 15
III. INSTALLATION 6. Chassis Intrusion Sensor Setting (JP1601) This allows you to disable or enable the chassis intrusion sensor. Set to Enable if you want to use this function to monitor the opening of the chassis. The default is set to Disable. JP1601 Setting Disable [2-3] (default) Enable [1-2] JP1601 JP1601 Disable Enable P2B-D2 Chassis Intrusion Sensor Setting 7. LAN Setting (LAN_EN) The onboard Intel 10/100 Fast Ethernet may be enabled or disabled using this jumper. LAN EN Setting Enable [
Streszczenie treści zawartej na stronie nr. 16
III. INSTALLATION System Memory III. INSTALLATION 2. System Memory Main Memory (DIMM) This motherboard supports Dual Inline Memory Modules (DIMMs). Sockets are avail- able for 3.3Volt (power level) unbuffered Synchronous Dynamic Random Access Memory (SDRAM). One side (with memory chips) of the DIMM takes up one row on the motherboard. To utilize the chipset’s Error Checking and Correction (ECC) feature, you must use a DIMM module with 9 chips per side (standard 8 chips/side + 1 ECC chip) and m
Streszczenie treści zawartej na stronie nr. 17
Streszczenie treści zawartej na stronie nr. 18
III. INSTALLATION i960 Memory III. INSTALLATION i960 Memory (SIMM) The i960 processor supports two 72-pin, 32-bit SIMMs (Single-Inline Memory Modules) of 4, 8, 16, 32, 64, or 128MB to form a memory size between 8MB to 256MB. Only Extended Data Output (EDO) DRAM, non-parity SIMMs can be sup- ported by the i960 processor. IMPORTANT: You must use i960 SIMM socket 1 when using only one module. SIMM Installation 1. The SIMM memory modules will fit in only one orientation as shown because the plastic
Streszczenie treści zawartej na stronie nr. 19
III. INSTALLATION 3. Central Processing Unit (CPU) This motherboard provides two Single Edge Contact (SEC) slots for Pentium II processors packaged in SEC cartridges. Pentium II Processor You should check to see that you have the following items: Lock Holes Captive Nut Two Pentium II Retention Mechanisms Two Attach Mount Bridges (factory installed) Top Bar Pin Posts Base Larger Fin should (Factory Installed) be on the bottom. Heatsink bottom Groove f Heatsink Support Base/Top Bar Pentium II Pro
Streszczenie treści zawartej na stronie nr. 20
III. INSTALLATION CPU III. INSTALLATION WARNING! Be sure that there is sufficient air circulation across the processor’s heatsink by regularly checking that your CPU fan is working. Without sufficient circulation, the processor could overheat and damage both the processor and the motherboard. You may install an auxiliary fan, if necessary. Other Important Items Intel Pentium II Processor in an SEC cartridge ASUS C-P2T PC100 CPU Termination Card Installing the Pentium II Processor 1. Mount the P
