Краткое содержание страницы № 1
User’s manual
Part 2
Big button t elephone 915
Please also read
For Customer Service or product
Part 1 — Important
information, visit our website at
product information
www.telephones.att.com
or call 1 (800) 222-3111
© 2006 Advanced American Telephones. All rights reserved.
AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones.
Краткое содержание страницы № 2
Visit us at www.telephones.att.com or call 1 (800) 222-3111 © 2006 Advanced American Telephones. All rights reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 5 AT&T 08/06
Краткое содержание страницы № 3
Contents Before you begin ............... 1 Telephone memory....... 11 Parts list ................................... 1 Directory card ..................... 11 Store a number in Installation............................. 2 ............................. 11 Table/desk installation .......... 2 memory Store a pause in a Wall installation ...................... 5 memory number ............. 12 Telephone operation ...... 8 Dial a number in Make a call ............................... 8 one-touc
Краткое содержание страницы № 4
Before you begin Parts list Your box should include: This user’s manual User’s manual Part 2 Short telephone Big button t elephone 915 line cord Long telephone line cord Please also read For Customer Service or product Part 1 — Important information, visit our website at www.telephones.att.com product information or call 1 (800) 222-3111 © 2006 Advanced American Telephones. All rights reserved. AT&T and the Globe Symbol are trademarks of AT&T Corp., licensed to Advanced American Telephones.
Краткое содержание страницы № 5
Installation Table/desk installation 1. Install batteries to provide power for the lighted dial pad. Press the battery cover tab and remove the cover. Install four new alkaline AA batteries (not included). Be sure to follow the polarity guide in the battery compartment. Replace the cover. NOTE: The batteries are needed for the lighted dial pad to work. Replace the batteries when the lighted dial pad is dim or unlit in a dark room. Replace the batteries only with four new alkaline AA ba
Краткое содержание страницы № 6
2. Set the t one/pulse switch. If you have touch tone service, set the switch to TT (tone). If you have dial pulse (rotary) service, set the switch to DP (pulse). Tone/pulse switch 3. Connect the handset to the telephone. Plug the coiled cord into the handset jack on the left side of the base unit. Plug the other end of the coiled cord into the handset, then hang up. 4. Connect the long line cord to the telephone and a modular wall jack. Modular Telephone telephone line cord wall ja
Краткое содержание страницы № 7
5. Check for dial tone. Lift the handset and listen for a dial tone. If you cannot hear a dial tone, slide the VOLUME switch to the right. If you still do not hear a dial tone, see the In case of difficulty section beginning on page 15 of this user’s manual. 4 Installation Installation
Краткое содержание страницы № 8
Wall installation 1. Install batteries to provide power for the lighted dial pad. Press the battery cover tab and remove the cover. Install four new alkaline AA batteries (not included). Be sure to follow the polarity guide in the battery compartment. Replace the cover. NOTE: The batteries are needed for the lighted dial pad to work. Replace the batteries when the lighted dial pad is dim or unlit in a dark room. Replace the batteries only with four new alkaline AA batteries. 5 Installa
Краткое содержание страницы № 9
2. Set the tone/pulse switch. If you have touch tone service, set the switch to TT (tone). If you have dial pulse (rotary) service, set the switch to DP (pulse). 3. Connect the short line cord to the telephone. Plug the line cord into the jack labeled TELEPHONE LINE and thread the cord through the tabs under the phone as shown. r Modula telephone wall jack Tone/pulse switch Telephone line cord 4. Reverse the handset tab. This tab holds the handset when you hang up. Hold down the switchho
Краткое содержание страницы № 10
5. Connect the handset to the telephone. Plug the coiled cord into the handset jack on the left side of the base unit. Plug the other end of the coiled cord into the handset, then hang up. 6. Connect the line cord to a modular wall jack and mount the phone on the wall jack as shown. Make sure the cord snaps firmly into place. Place the phone on the wall jack mounting studs and pull down until it is held securely. 7. Check for dial tone. Lift the handset and listen for a dial tone. If
Краткое содержание страницы № 11
Telephone operation Make a call Lift the handset. When you hear a dial tone, dial using the dial pad or memory buttons. Ringing indicator Answer a call When you hear the phone ring and the ringing indicator turns on, you have an incoming call. Lift the handset to answer the call. Ringing indicator The ringing indicator is lit when you have an incoming call. It is off when the phone is not ringing. End a call Hang up the handset. 8 Telephone operation Telephone operation
Краткое содержание страницы № 12
Redial The last number dialed at this phone is stored in redial memory. To dial that number, lift the handset and listen for the dial tone, then press REDIAL/PAUSE. The number is dialed automatically. NOTE: Redial memory can store up to 32 digits. If the last number dialed was longer than 32 digits, nothing will be stored. If you press any numbers while using the redial feature those new numbers will be stored in redial and replace the previous one. Erase redial You can erase the redi
Краткое содержание страницы № 13
Temporary tone dialing If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing TONE *. All keys pressed after this will send touch tone signals. The phone returns to dial pulse when you hang up. Handset volume Slide the VOLUME control on the phone to adjust the volume of what you hear through the handset. Slide the control left to decrease volume or right to increase volume. Ringer volume Use the RINGER switch on the rig
Краткое содержание страницы № 14
Telephone memory This telephone can store 13 telephone numbers, each up to 16 digits long. You can dial numbers stored in memory by pressing one or two buttons. Directory card Lift the plastic cover off the directory card to write the numbers (or names) stored in telephone memory on the card. Then replace the cover. Store a number in memory 1. Lift the handset. 2. Press and release PROG. 3. Dial the telephone number (up to 16 digits). 4. Press and release PROG. 5. Press the memory lo
Краткое содержание страницы № 15
Store a pause in a memory number Press and release REDIAL/PAUSE once to store a three to four second pause in the dialing sequence. Each additional press will add another three to four second pause. NOTE: Each three to four second pause counts as one digit when storing numbers in telephone memory. Dial a number in one-touch memory To dial a number stored in memory locations , or : 1. Lift the handset and wait for a dial tone. 2. Press the memory button ( , or ) where the n
Краткое содержание страницы № 16
General product care To keep your phone working and looking good, follow these guidelines: • Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). • DO NOT expose it to direct sunlight or moisture. • Avoid dropping the phone and/or other rough treatment. • Clean with a soft cloth. • Never use a strong cleaning agent or abrasive powder because this will damage the finish. • Retain the original packaging in case you nee
Краткое содержание страницы № 17
Technical specifications REN 1.3B Power Four AA batteries are required for backlighting. Phone must also be connected to telephone line for all features to work. + Line feed voltage 48V ⁄- 2V Line loop current 18mA to 100mA Ringer levels Off = 0dB HI = 85dB Compliance FCC and UL approved Memory One-touch memory: 3 Memory locations, 16 digits per location Two-touch memory: 10 Memory locations, 16 digits per location 14 Technical specifications Technical specifications
Краткое содержание страницы № 18
In case of difficulty If you have difficulty operating this phone, try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 (800) 222–3111. In Canada, please call 1 (866) 288-4268. Please retain your receipt as your proof of purchase. To purchase accessories or replacement parts, please contact customer service through the above website or telephone number. Telephone operation Problem Solution No dial tone • Make sure all plugs are conne
Краткое содержание страницы № 19
Telephone operation Problem Solution Lighted dial pad • Make sure you have installed four fully is dim or does charged AA batteries (not included) not work following the polarity guide in the battery compartment. (See Installation beginning on page 2 of this user’s manual for details.) • You may not be able to tell that the dial pad is lit unless the room is dark. • In order to save the batteries, the lighted dial pad lights for a few seconds every time you lift the hands
Краткое содержание страницы № 20
I n d e x A P Pause 12 AUDIO ASSIST™ 10 R B Redial memory 9 Batteries 2, 5, 16 RINGER switch 10,15 D Ringer volume 10 Difficulty storing numbers in memory 16 T Directory card 11 Telephone does not ring 15 Temporary tone dialing 10 F Tone/pulse switch 3, 6 Flash 9 Touch tone signals 10 H Two-touch dialing 11 Handset tab 6 Two-touch memory 12, 14 Handset volume 4, 7, 10 L Line cord 1, 3, 6, 15–16 Lighted dial pad 2, 5 Lighted dial pad is dim or do not work
