Краткое содержание страницы № 1
C M Y K
OPERATION MANUAL
ENGLISH
882-147
194147-011 ®
Printed in Taiwan
Краткое содержание страницы № 2
“IMPORTANT SAFETY INSTRUCTIONS” When using a sewing machine, basic safety precautions should always be taken, including the following: “Read all instructions before using.” DANGER – To reduce the risk of electric shock. 1. The sewing machine should never be left unattended while plugged in. Always unplug the sewing ma- chine from the electrical outlet immediately after using and before cleaning. 2. Always unplug before changing the light bulb. Replace bulb with same type rated 8V 2.4 watts. WARN
Краткое содержание страницы № 3
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY. If your sewing machine is fitted with a three-pin non-rewireable BS plug then please read the following. IMPORTANT If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three-pin plug fitted. With alternative plugs an approved fuse must be fitted in the plug. NOTE The plug served from the main lead must be destroyed as a plug with bared flexible cords is hazardous if enga
Краткое содержание страницы № 4
CONGRATULATIONS ON CHOOSING A BROTHER COMPUTER SEWING MACHINE Your machine is the most advanced computerized home use sewing machine available. To fully enjoy all the features incorporated into it, we suggest that you study this booklet. PLEASE READ BEFORE USING YOUR SEWING MACHINE For safe operation 1. Be sure to keep your eye on the needle while sewing. Do not touch the balance wheel, thread take-up, needle, or other moving parts. 2. Remember to turn off the power switch and unplug the cord w
Краткое содержание страницы № 5
WARNING LABELS There should be several warning labels on your sewing machine. Please heed warning labels when operating the sewing machine. If you don't understand the warnings, please contact the place of purchase. CAUTION Always remove the embroidery unit before moving the sew- ing machine. Otherwise the embroidery unit could fall and cause bodily injury or damage to the unit. Warning label CAUTION Always carry the embroidery unit by the handle as illustrated in Fig. 1. Do not carry it by the
Краткое содержание страницы № 6
CONTENTS Triple stitch ................................................... 40 SETTING UP ZIGZAG STITCHES ........................................... 41 Overcasting (using a zigzag stitch) .............. 41 ................................................... 5 Applique (using a zigzag stitch) ................... 41 PRINCIPAL PARTS ............................................. 5 Patchwork (for crazy quilt) ........................... 42 OTHER INCLUDED ACCESSORIES .................. 7 Sewing a curv
Краткое содержание страницы № 7
CHECKING THREAD COLORS AND TIME PATTERNS (MEMORY CARD) REQUIRED ........................................................ 81 Checking thread colors ................................ 81 ............................................... 108 Checking time required to complete a ONE POINT MARK EMBROIDERY pattern .......................................................... 82 PATTERN ......................................................... 108 CHOOSING EMBROIDERY PLACEMENT ........ 83 Moving the embroider
Краткое содержание страницы № 8
SETTING UP PRINCIPAL PARTS 1 12 2 3 4 5 13 D C 6 7 8 9 10 16 A 11 14 B 15 1– Handle A– Main power switch and connectors 2– Spool cap B– Accessory compartment 3– Thread guide for bobbin winding C– L.C.D. (Liquid Crystal Display) 4– Upper tension control dial D– Operation buttons (Refer to page 10) 5– Speed range control lever 6– Thread cutter 7– Buttonhole lever 8– Needle threader 9– Presser foot 10– Feed dog 11– Bobbin cover 12– Bobbin winder 13– Balance wheel 14– Feed dog adjustment lever 15– C
Краткое содержание страницы № 9
A. MAIN POWER SWITCH AND CONNECTORS 1 Power socket Use to connect machine to power supply. 2 Main power switch Use to turn on/off the main power. 3 Air vents 4 Card slot Slot for memory card insertion. 5 Foot controller jack Use to connect the foot controller. CAUTION – When leaving the sewing machine unat- tended, the main switch of the machine must be switched off or the plug must be removed from the socket-outlet. – When servicing the sewing machine, or when removing covers or changing b
Краткое содержание страницы № 10
R R OTHER INCLUDED ACCESSORIES No. Part Name Part Code 1 Blind stitch foot “R” X56409-001 123 2 Zipper foot “I” 103561-002 3 Button sew-on foot X59375-051 4 Extra spool pin * XA3336-051 5 Cleaning brush X59476-051 6 Scissors 184783-001 7 Embroidery foot “Q” XA5357-001 456 8 Key XA2005-051 9 Owner's Manual — 10 Hard case/Extension table — 11 Embroidery Unit Cover — 12 Embroidery unit — 789 13 Embroidery frame set SA432 (USA) (Regular) XA6628-002 (Others) 14 Backing m
Краткое содержание страницы № 11
OPTIONS Part Code No. Part Name U.S.A. Others 12 1 Embroidery frame set (Small) SA431 XA6630-002 2 Backing material (Stabilizer material) X80914-001 Memory card No.1 Alphabet SA298 X58317-001 No.2 Flower SA299 X58321-001 No.6 Moskowitz’s World SA303 X58497-001 3 No.7 Country Life SA304 X59322-001 No.8 Holiday SA305 X59357-001 No.9 Hobby Craft SA306 X59511-001 No.10 Monogram emblem SA307 X59567-001 No.12 Transportation SA312 XA0275-001 No.13 Sports Emblem SA313 XA0517-001 No.16 Dogs & Cats SA316
Краткое содержание страницы № 12
SELECTION KEYS Screen messages guide you through each operation SELECTION KEYS 1 “ ” KEY Press while in the pattern selection screens to go back one page. (also used in Save and Restore screens) 2 “ ” KEY Press to advance one screen while in pattern selec- tion screens. (also used during Save and Restore operations) 3 “ ” KEY Pushing this key will take you to the screen that will let you select pattern to embroider. 4 “ ” KEY Select this when you wish to edit a selected pattern (sewi
Краткое содержание страницы № 13
OPERATION BUTTONS Using the operation buttons OPERATION BUTTONS 1 Speed range control lever Slide this lever to change the sewing speed. 2 “NEEDLE POSITION” button Press this button to move the needle either up or down. 3 “REVERSE STITCH” button Hold down this button to sew either backwards or in the same place at a slow speed. When sewing a reverse stitch, sewing is done in reverse. When sew- ing a reinforcement stitch, three stitches are sewn at the same position. 4 “START/STOP” button Pre
Краткое содержание страницы № 14
BASIC SEWING MACHINE OPERATION FLAT BED EXTENSION TABLE * Sewing machine cover converts to a flat bed extension table. 1. Slide the sewing machine cover to the left and off the ma- chine. 2. With the cutout section of the cover up, lift the machine a little bit and slide the cover, under the sewing machine along the grooves. Free arm The accessory case can be removed to expose the free arm. 1. Slide accessory case to the left and out of the machine. 2. Convenient for sewing hard to get at tubula
Краткое содержание страницы № 15
POWER SUPPLY WARNING – When leaving the sewing machine unattended or when it is not being used, turn off the main power switch of the machine or remove the plug from the wall outlet. CAUTION – Do not use this sewing machine with extension cords or multi-plug adaptors, otherwise a fire or an electric shock may occur. – Do not remove the plug from the wall outlet with wet hands, otherwise an electric shock may occur. – When unplugging the power cord, turn off the main power switch of the machine,
Краткое содержание страницы № 16
USING THE SCREEN KEYS Touch a key on the screen with your finger to select the pattern which appears inside the key or to start the function or operation indicated inside the key. CAUTION Be sure to touch the key with your finger only. Never use a pointed instrument such as a sharp pencil or a screwdriver or a hard object to touch the key. Furthermore, do not press down too hard on the screen, otherwise problems may result. ABOUT THE SCREEN NOTES – All or parts of the screen may become darker or
Краткое содержание страницы № 17
HOW TO CHANGE LANGUAGE While touching a selection key, turn the power off and then back on again. Example: To change the display language to Spanish 1. Touch the “ ” key. 2. Touch “ESPAÑOL (SPANISH)”. This will change the language setting to Spanish. 3. The display will then return to the screen which was previously being displayed. Note * When the display language is set, error messages will also be displayed in the language selected. * The display language can be selected from a list of 13 la
Краткое содержание страницы № 18
How to clear the language selection While touching a selection key, turn the power off and then back on again. Example: To change the display language from Spanish back to English 1. Touch the “ENGLISH” key. This will cancel the Spanish language setting. The display will then return to the screen which was previously being displayed. CAUTION – This function should not be used as a translation function. – If the power supply is turned off, the current lan- guage setting will be retained and will
Краткое содержание страницы № 19
BOBBIN WINDING / BOBBIN THREAD SETTING Note: Always use bobbins that are especially made for this machine. Using bobbins not designed for this machine could result in bodily injury and/or damage to the machine. For sewing, use the plastic bobbin (X80309-001) for sewing. 5·11 2·3 4 7 6·8 9·10 1 1. Turn the power on. I O 2. While winding the bobbin, be sure that the spool pin is pulled out and pushed toward the back of the sewing machine. 1 Spool pin 16
Краткое содержание страницы № 20
3. Set the thread spool. The thread end should come from the bottom front of the spool. The spool cap closest to the thread spool size should be used to hold the spool securely on the spool pin. 1 Spool cap 2 Spool CAUTION If the spool is placed onto the pin in the wrong direction, the thread could entwine itself around spool pin. If using a fine thread such as cross wound thread, slightly separate the spool cap (small) from the thread on the spool before using. 1 Spool cap (small) 2 Space 3
