Краткое содержание страницы № 1
Please read this manual and save Please read this manual and save
it with your original sales receipt. it with your original sales receipt.
T Tools needed for assembly: Phillips ools needed for assembly: Phillips
S Screwdriver (not included) and crewdriver (not included) and
A Assembly T ssembly Tool (included). ool (included).
® ®
U Use only with a Power Wheels se only with a Power Wheels
1 12 V 2 Volt Rechargeable Batter olt Rechargeable Battery and y and
® ®
P Power Wheels ower Wheels
Краткое содержание страницы № 2
TABLE OF CONTENTS Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Parts Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 3
IMPORTANT INFORMATION ELECTRICAL HAZARD DANGER To prevent electric shock, do not immerse in water; wipe clean with a damp cloth. WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Ne ver modify the electrical system. Alterations could cause a fi re resulting in serious injury and could also ruin the electrical system. - Use of the wr ong type battery or charger could cause a fi re or explosion resulting in serious injury. ® ®
Краткое содержание страницы № 4
PARTS • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant. Grill Vehicle Seat Rear Deck Front Bumper Spo
Краткое содержание страницы № 5
PARTS Steering Wheel Steering Wheel Cap 12 Volt Battery 4 Hubcaps 2 Bushings 12 Volt Charger 2 Mirrors 5⁄32" x 1½ " Pin - 1 ⅜ " -16 Lock Nut - 2 2 Mirror Covers #8 x ¾ " Screw - 29 #8 x ¾ " Black Screw - 7 Steering Column Cap Assembly Tool ¼ " x 1¼ " Screw - 2 Steering Column 7⁄16" Washer - 2 For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver. Long Seat Belt 2 Short Seat Belts Do not over-tighten the screws. Part not show
Краткое содержание страницы № 6
PARTS PICTURE 11 Note: Some parts shown are assembled to both sides of the vehicle. 10 21 17 25 14 3 6 20 20 15 5 1 4 22 19 7 24 18 16 23 13 12 9 8 2 26 Parts Not Shown 1 Vehicle 9 Wheel Covers - 2 17 Steering Column 25 Spoiler 7 2 Front Bumper 10 Steering Wheel 18 /16" Washers - 2 26 Grill Assembly Tool 3 Dash Assembly 11 Steering Wheel Cap 19 Long Seat Belt #8 x ¾" Screws - 29 4 Hood 12 Hubcaps - 4 20 Short Seat Belts - 2 #8 x ¾" Black Screws - 7 5 1 5 Rear Deck 13 Bushings - 2 21 /32"
Краткое содержание страницы № 7
BATTERY CHARGING ELECTRICAL HAZARD CAUTION WARNING Use the charger in dry locations only. • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. About Thermal Fuses • PREVENT FIRE ® Your Power Wheels 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resetting safety device - Ne ver modify the electrical system. which automatically “trips” and shuts down operation of the Alterations could cause a fi re resulting vehic
Краткое содержание страницы № 8
BATTERY CHARGING ASSEMBLY WARNING Power B Indicator Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. A CAUTION • In the unassembled state, this package Charger contains small parts. Adult assembly Connector is required. A • Plug the charger connector into
Краткое содержание страницы № 9
ASSEMBLY Front Bumper 2 Bushing Washer • Fit the front bumper onto the vehicle. Front Axle 4 • Slide a 7⁄16" washer the right (passenger's) side of the front axle. • Fit a bushing, flat side first, onto the front axle. 3 Front Wheel • Insert six #8 x ¾ " screws into the front bumper and tighten. Wheel Cover 5 (Marked R) Note: There is a right and left front wheel. They are marked with an R and L. • Locate the right front wheel marked with an R. Place the front wheel R, onto the front axle on t
Краткое содержание страницы № 10
ASSEMBLY E 8 Assembly Lock Nut FRONT VIEW 6 Tool • Insert six #8 x ¾ " screws into the front bumper and tighten. • Fit a ⅜ "-16 lock nut, rounded side out, onto the front axle. IMPORTANT! Tighten the lock nut firmly with the closed end of the assembly tool. • Test to be sure the front wheel moves freely on the front axle. Turn the front wheel. • If the front wheel does not move freely, loosen the lock nut ¼ turn and test again. Repeat this procedure as necessary. • Repeat steps 4-6 to as
Краткое содержание страницы № 11
ASSEMBLY Mirror Dash Assembly Mirror Cover 10 12 • Fit a mirror and mirror cover to an end of the dash assembly. Hint: Each mirror and mirror cover only fit on one side of the • Insert four #8 x ¾ " screws into the dash assembly and tighten. vehicle. If they do not seem to fit, try assembling on the other side. • Insert two #8 x ¾ " screws into the mirror cover and tighten. • Repeat this procedure to attached the other mirror and mirror cover to the opposite end of the dash assembly. P Post
Краткое содержание страницы № 12
ASSEMBLY 25 24 11 17 17 17 17 28 29 15 Batter B Batter attery y Compartment Door y Compartment Door Compartment Door 15 14 DASH VIEW • Locate the simulated radio on the dash. • Before applying the labels, wipe the surface of the vehicle with • Loosen two screws a clean, dry cloth to remove any dust or oils. under the dash to remove the simulated radio. Set the • Place the labels exactly as shown in the illustrations. For best screws aside. results, avoid repositioning a label once it has be
Краткое содержание страницы № 13
ASSEMBLY Rear Deck Hood 18 BACK VIEW • Fit the tabs on the rear deck into the slots in the back end of the vehicle. 16 FRONT VIEW Short Seat Belts • Fit the long tabs on the hood into the slots in the front end of the vehicle. • Pull the hood forward and lower. Note: The hood is held down by magnets. Simply lift to open the hood. Do not use around items that are sensitive to or affected by magnetic fields. Rear Deck Seat Long Seat Belt 19 • Insert the fastener end of a short seat belt strap th
Краткое содержание страницы № 14
ASSEMBLY 22 BOTTOM VIEW • Turn the vehicle over. Slots • Insert two #8 x ¾ " screws through the vehicle and into the rear deck. Tighten the screws. 20 TOP VIEW Note: The seat is adjustable and has three positions. You can move the seat back as your child grows. • Insert both tabs on the front edge of the seat into one of the sets of slots inside the vehicle. • Choose the slots closest to the dash for shorter drivers and the slots furthest from the dash for taller drivers. Steering Column 2
Краткое содержание страницы № 15
ASSEMBLY Press Wheel Steering Column Cap Steering Column Cap Lift Steering Lift Steering 25 Column Column 27 • Fit the Steering Column cap onto • While pressing down on the steering wheel, grasp the steering the end of the column under the dash and pull it up as far as it will go. steering column. • Insert the 5⁄32" x 1½ " pin through the hole in the steering column. • Insert a #8 x ¾ " screw through the • Grasp the steering column again and pull down to fit the pin large opening in the
Краткое содержание страницы № 16
DECORATION • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applied to the vehicle. • After applying a label, rub the label firmly with a clean, dry cloth to make sure the label is adhered to your vehicle. Start at the center of a label, and smooth towards the outer edges to remove air bubbles. 26 27 1 FRONT VI
Краткое содержание страницы № 17
DECORATION 4 9 19 LEFT VIEW 3 10 20 RIGHT VIEW 22 23 2 2 DOOR VIEW P5920pr-0920 17
Краткое содержание страницы № 18
BATTERY INSTALLATION ® IMPORTANT! Use only a Power Wheels 12 volt lead-acid rechargeable battery. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at ® least 18 hours using the enclosed Power Wheels 12 volt charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions may damage your battery a
Краткое содержание страницы № 19
BATTERY CARE AND DISPOSAL Care Disposal If a battery leak develops, avoid contact with the leaking acid and ® • Your Power Wheels battery is a non-spillable, sealed lead-acid place the damaged battery in a plastic bag. See information below battery. It must be recycled or disposed of in an environmentally for proper disposal. sound manner. If acid comes in contact with skin or eyes, flush with cool • Do not dispose of a lead-acid battery in a fire. The battery may water for at least 15 min
Краткое содержание страницы № 20
SAFE DRIVING RULES Teach Safety Rules to Children RIDING HAZARD While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills WARNING are still very immature. Unsupervised driving by children can lead to serious injury. Before children use this vehicle, an adult should carefully evaluate the driving area as well as the children’s • Prevent Injuries and Deaths skill level and ability to drive this vehicle safely. Childre
