Краткое содержание страницы № 1
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has "AGP
4X notch"(show below), please make sure your AGP card is AGP 4X
(1.5V).
Do not use AGP 2X card (3.3V) in this motherboard. It will burn and
®
damage the motherboard due to Intel 845(E/G) / 850(E) chipset
can't support AGP 2X(3.3V).
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X (1.5V)
Краткое содержание страницы № 2
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the informa- tion contained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
Краткое содержание страницы № 3
Declaration of Conformity We, Manufacturer/Importer (full address) .. G.B.T. Technology Trading GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-8IR2003 is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems ca
Краткое содержание страницы № 4
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsible Party Name: G.B.T. INC. (U.S.A.) Address: 17358 Railroad Street City of Industry, CA 91748 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: Motherboard GA-8IR2003 Model Number: Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules
Краткое содержание страницы № 5
GA-8IR2003 P4 Titan DDR Motherboard USER'S MANUAL ® Pentium 4 Processor Motherboard Rev. 2002 12ME-8IR2003-2002
Краткое содержание страницы № 6
Table of Content Item Checklist ......................................................................................... 4 WARNING! ............................................................................................... 4 Chapter 1 Introduction ............................................................................ 5 Features Summary ...................................................................................... 5 GA-8IR2003 Motherboard Layout ..............................
Краткое содержание страницы № 7
English Frequency/Voltage Control ........................................................................ 45 Top Performance ...................................................................................... 47 Load Fail-Safe Defaults ............................................................................. 48 Load Optimized Defaults ........................................................................... 49 Set Supervisor/User Password ...............................................
Краткое содержание страницы № 8
Item Checklist The GA-8IR2003 motherboard 2 Port USB Cable x 1 4 Port USB Cable x 1 IDE cable x 1 / Floppy cable x 1 SPDIF KIT x 1 (SPD-KIT) CD for motherboard driver & utility IEEE 1394 Cable x 1 GA-8IR2003 user's manual Audio Combo Kit x 1 I/O Shield Motherboard Settings Label Quick PC Installation Guide RAID Manual WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow so
Краткое содержание страницы № 9
English Chapter 1 Introduction Features Summary Form Factor 19.6cm x 29.5cm ATX size form factor, 4 layers PCB ® ® CPU Socket 478 for Intel Micro FC-PGA2 Pentium 4 processor ® ® Support Intel Pentium 4 (Northwood, 0.13 m) processor ® ® Support Intel Pentium 4 Processor with HT Technology * ® ® Intel Pentium 4 400/533MHz FSB ® Auto detect and optimized setting for Pentium 4 processor 2nd cache depends on CPU ® Chipset Chipset Intel 845 HOST/AGP/Controller ICH2 I/O Controller Hub Memo
Краткое содержание страницы № 10
On-Board Sound Realtek ALC650 CODEC Line Out / 2 front speaker Line In / 2 rear speaker(by s/w switch) Mic In / center & subwoofer(by s/w switch) SPDIF In / Out CD In / AUX In / Game port PS/2 Connector PS/2 Keyboard interface and PS/2 Mouse interface BIOS Licensed AWARD BIOS, 2M bit FWH Supports Q-Flash Additional Features PS/2 Keyboard password power on PS/2 Mouse power on STR(Suspend-To-RAM) AC Recovery USB KB/Mouse wake up from S3 Poly fuse for keyboard, USB, game port over-cu
Краткое содержание страницы № 11
English GA-8IR2003 Motherboard Layout KB_MS USB SOCKET478 F_AUDIO ATX_12V CPU_FAN Intel 845 AGP CD_IN CODEC 2X_DET BATTERY PCI1 PCI2 SYS _FAN SUR_CEN PCI3 ICH2 CLR_PWD CI P4 Titan PCI4 IDE2 PCI5 ITE8712 IDE1 PWR_LED BIOS AUX_IN SPDIF_IO F_USB1 F_PANEL - 7 - Hardware Installation Process MIC_IN LINE_OUT LINE_IN COMB COMA GAME LPT GA-8IR2003 DDR1 DDR2 DDR3 ATX FDD
Краткое содержание страницы № 12
Chapter 2 Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Connect ribbon cables, cabinet wires, and power supply Step 5- Setup BIOS software Step 6- Install supporting software tools Step 4 Step 1 Step 2 Step 4 Step 4 Step 1 Step 3 Step 4 GA-8IR2003 Motherboard - 8 - English
Краткое содержание страницы № 13
English Step 1: Install the Central Processing Unit (CPU) Step 1-1: CPU Installation Socket Angling the Actuation 0 rod to 65 Lever 2. Pull the rod to the 90-degree directly . 1. Angling the rod to 65-degree maybe feel a kind of tight , and then continue pull the rod to 90-degree when a noise "cough" made. Pin1 indicator Pin1 indicator 4. Locate Pin 1 in the socket and look 3. CPU Top View for a (golden) cut edge on the CPU upper corner. Then insert the CPU into the socket. Please make sure the
Краткое содержание страницы № 14
Step 1-2: CPU Heat Sink Installation 2. Hook the other end of the cooler 1. Hook one end of the cooler bracket bracket to the CPU socket. to the CPU socket first. Please use Intel approved cooling fan. We recommend you to apply the thermal tape to provide better heat conduction between your CPU and heatsink. (The CPU cooling fan might stick to the CPU due to the hardening of the thermal paste. During this condition if you try to remove the cooling fan, you might pull the processor out of the CPU
Краткое содержание страницы № 15
English Step 2: Install memory modules The motherboard has 3 dual inline memory module (DIMM) sockets, but it can only support a maximum of 4 banks of DDR memory. DDR slot 1 uses 2 banks, DDR slot 2 & 3 share the remaining 2 banks. Please refer to the following tables for possible memory configurations supported. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM socket. The DIMM module can only fit in one direction due t
Краткое содержание страницы № 16
DDR 1. The DIMM socket has a notch, so the DIMM memory module can only fit in one direction. 2. Insert the DIMM memory module vertically into the DIMM socket. Then push it down. 3. Close the plastic clip at both edges of the DIMM sockets to lock the DIMM module. Reverse the installation steps when you wish to remove the DIMM module. DDR Introduction Established on the existing SDRAM industry infrastructure, DDR (Double Data Rate) memory is a high performance and cost-effective solution that allo
Краткое содержание страницы № 17
English Step 3: Install expansion cards 1. Read the related expansion card's instruction document before install the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard. 4. Be sure the metal contacts on the card are indeed seated in the slot. 5. Replace the screw to secure the slot bracket of the expansion card. 6. Replace your computer's chassis cover. 7. Power
Краткое содержание страницы № 18
Step 4: Connect ribbon cables, cabinet wires and power supply Step 4-1: I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector This connector supports standard PS/2 PS/2 Mouse Connector keyboard and PS/2 mouse. (6 pin Female) PS/2 Keyboard Connector (6 pin Female) USB Connector Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard,mouse, scanner, zip, speaker...etc. Have a standard USB interface. USB 0 Also
Краткое содержание страницы № 19
English Parallel Port and Serial Ports (COMA / COMB) Parallel Port This connector supports 2 standard COM ports (25 pin Female) and 1 Parallel port. Device like printer can be connected to Parallel port; mouse and modem etc. can be connected to Serial ports. COMA COMB Serial Port (9 pin Male) This connector supports joystick, MIDI Game / MIDI Ports keyboard and other relate audio devices. Joystick/ MIDI (15 pin Female) After install onboard audio driver, you may con- Audio Connectors nect sp
Краткое содержание страницы № 20
Step 4-2: Connectors Introduction 2 1 5 10 3 9 12 18 11 4 17 16 6 8 13 14 15 7 1) ATX_12V 10) F_AUDIO 2) ATX 11) SUR_CEN 3) CPU_FAN 12) CD_IN 4) SYS_FAN 13) AUX_IN 5) FDD 14) SPDIF_IO 6) IDE1 / IDE2 15) F_USB1 7) F_PANEL 16) CI 8) PWR_LED 17) CLR_PWD 9) 2X_DET 18) BATTERY GA-8IR2003 Motherboard - 16 - English
