Краткое содержание страницы № 1
8S648FXP-RZ /
8S648FXP-RZ-C
® ®
Intel Pentium 4 Processor Motherboard
User's Manual
Rev. 1001
12ME-S648FXPRZ-1001
Copyright
© 2004 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from
without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on motherboard, this may void the warranty o
Краткое содержание страницы № 2
Mother Board 8S648FXP-RZ Motherboard 8S648FXP-RZ Nov. 3, 2004 Nov. 3, 2004
Краткое содержание страницы № 3
Preparing Your Computer Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Ho
Краткое содержание страницы № 4
Table of Contents Chapter 1 Introduction ................................................................................................... 5 Features Summary .................................................................................................................. 5 8S648FXP-RZ Series Motherboard Layout ............................................................................... 6 Block Diagram ........................................................................................
Краткое содержание страницы № 5
English Chapter 1 Introduction Features Summary Motherboard 8S648FXP-RZ or 8S648FXP-RZ-C ® ® CPU Socket 478 for Intel Pentium 4 (Northwood, Prescott) with HT Technology ® ® Intel Pentium 4 800/533/400MHz FSB 2nd cache depends on CPU Chipset Northbridge : SiS 648FX Southbridge : SiS 964 Memory 3 184-pin DDR DIMM sockets, supports up to 3GB DRAM (Max) Supports DDR400/DDR333/DDR266 DIMM Supports up to 2 unbuffered DIMM DDR400 Supports up to 3 unbuffered DIMM DDR333 Supports only 2.5V DD
Краткое содержание страницы № 6
8S648FXP-RZ Series Motherboard Layout 21 cm CPU_FAN KB_MS ATX SOCKET478 IDE2 IDE1 R_USB ATX_12V F_AUDIO SiS 648FX AGP 8X ICS1883 * AGP BAT CODEC PCI1 CD_IN P4 Titan CLR_CMOS PCI2 SUR_CEN VRM10.0 SATA1 PCI3 SiS 964 SATA0 PCI4 BIOS PCI5 FDD F_USB2 SPDIF_IO SYS _FAN IR F_PANEL F_USB1 PWR_LED "*" Only for 8S648FXP-RZ. "#" Only for 8S648FXP-RZ-C. 8S648FXP-RZ Series Motherboard - 6 - English # MIC_IN -C USB COMB COMA LINE_OUT IT8705 LINE_IN LPT LAN * Hyper Threading 8S648FXP-RZ Support DDR1 DDR2 DDR
Краткое содержание страницы № 7
English Block Diagram Pentium 4 CPUCLK+/- (100/133/200 MHz) Socket 478 CPU AGP 4X/8X System Bus AGPCLK 400/533/800 MHz 266/333/400 MHz (66MHz) DDR SiS 648FX ZCLK (66/133MHz) HCLK+/- (100/133MHz) 5 PCI RJ45 * 66/133 MHz 33 MHz 14.318 MHz 48 MHz ICS1883 * BIOS SiS 964 AC97 Link LPC BUS Floppy IT8705 LPT Port AC97 CODEC PS/2 KB/Mouse PCICLK 24 MHz (33MHz) 2 SATA ATA33/66/ 33 MHz 8 USB 100/133 Ports 2 COM Ports Ports IDE Channels "*" Only for 8S648FXP-RZ. - 7 - Introduction MIC LINE-IN LINE-OUT
Краткое содержание страницы № 8
Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Install I/O Peripherals Cables Step 4 Step 1 Step 2 Step 4 Step 4 Step 3 Step 1: Install the Central Processing Unit (CPU) Before installing the processor, adhere to the following warning: 1. Please make sure the CPU type is supported by the motherboard. 2. The processor will overheat
Краткое содержание страницы № 9
English Step 1-1: CPU Installation Figure 1. Socket Pull the rod to the 90-degree directly. Actuation Lever Figure 2. Locate Pin 1 in the socket and look for a (golden) cut edge on the CPU upper corner. Insert the CPU into the socket. (Do not force the CPU into the socket.) Then move the socket lever to the locked position while holding pressure on the center of the CPU. Step 1-2: CPU Cooling Fan Installation Figure 1. Apply the thermal tape(or grease) to provide better heat conduction between y
Краткое содержание страницы № 10
Step 2: Install Memory Modules Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be used. 2. Before installing or removing memory modules, please make sure that the computer power is switched off to prevent hardware damage. 3. Memory modules have a foolproof insertion design. A memory module can be installed in only
Краткое содержание страницы № 11
English Step 3: Install AGP Card 1. Read the relate AGP card's instruction document before install the AGP card into the computer. 2. If your AGP card has "AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP card is AGP 4X/8X(1.5V). AGP 4X/8X notch 3. Please carefully pull out the small white-drawable bar at the end of the AGP slot when you try to install/uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on the slot. Make sure your AGP card
Краткое содержание страницы № 12
LAN port * The provided Internet connection is fast Ethernet, providing data transfer speeds of 10/100Mbps. Line In jack Devices like CD-ROM, walkman etc. can be connected to Line In jack. Line Out jack Connect the stereo speakers or earphone to this connector. MIC In jack Microphone can be connect to MIC In jack. Step 4-2: Connectors Introduction 1 3 2 6 10 17 16 13 11 7 5 9 12 15 4 14 8 1) ATX_12V 10) F_AUDIO 2) ATX 11) SPDIF_IO 3) CPU_FAN 12) SUR_CEN 4) SYS_FAN 13) CD_IN 5) FDD 14) F_USB1 / F
Краткое содержание страницы № 13
English 1/2) ATX_12V / ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly. The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power connector is not connected, the system wi
Краткое содержание страницы № 14
5) FDD (FDD Connector) The FDD connector is used to connect the FDD cable while the other end of the cable connects to the FDD drive. The types of FDD drives supported are: 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB. Please connect the red power connector wire to the pin1 position. 2 34 1 33 6) IDE1 / IDE2 (IDE1 / IDE2 Connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (h
Краткое содержание страницы № 15
English 8) PWR_LED PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode. Pin No. Definition 1 MPD+ 1 2 MPD- 3 MPD- 9) F_PANEL (2 x 10 pins Connector) Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment below. Message LED/Power/ Sleep LED Power Switch Speaker Connector 2 20 1 19 IDE Hard Disk Reset S
Краткое содержание страницы № 16
10) F_AUDIO (Front Audio Connector) If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize the front audio header, your chassis must have front audio connector. Also please make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis you are buying support front audio connector, please contact your dealer. Please note, you can have the alternative of using front audio connector or of using rear aud
Краткое содержание страницы № 17
English 12) SUR_CEN (Surround Center Connector) Please contact your nearest dealer for optional SUR_CEN cable. Pin No. Definition 1 SUR OUTL 6 5 2 SUR OUTR 2 1 3 GND 4 No Pin 5 CENTER_OUT 6 BASS_OUT 13) CD_IN (CD In Connector) Connect CD-ROM or DVD-ROM audio out to the CD_IN connector Pin No. Definition 1 1 CD-L 2 GND 3 GND 4 CD-R 14) F_USB1 / F_USB2 (Front USB Connector) Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB c
Краткое содержание страницы № 18
15) IR Be careful with the polarity of the IR connector while you connect the IR. Please contact your nearest dealer for optional IR device. Pin No. Definition 1 VCC 1 2 No Pin 3 IR RX 4 GND 5 IR TX 16) CLR_CMOS (Clear CMOS) You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper. 1 Open: Normal 1 Short: Clear CMOS 17) BAT (BATTERY) CAUTION Danger of explosion if bat
Краткое содержание страницы № 19
English Chapter 2 BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING SETUP Powering ON the computer and pressing immediately will allow you to enter Setup. If you require more advanced BIOS settings, please go to "Advanced BIOS" setting menu. To enter Advanced BIOS
Краткое содержание страницы № 20
If you can't find the setting you want, please press "Ctrl+F1" to search the advanced option hidden. • Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award special enhanced features. Integrated Peripherals This setup page includes all onboard peripherals. Power Management Setup This setup page includes all the items of Green function features. PnP/PCI Configuration This setup page
