Clam Corp Fish Trap Scout 8244の取扱説明書

ページ1に含まれる内容の要旨

Mo de l No.
- 8244 -
p/ n 1 0 83 2 1

Specifications
Height: 58” (20” packed)
▪
Width: 36”
▪
▪ Depth: 80” (48” packed)
Weight: 47 lbs.
▪
Instruction p/n 102475
▪
















- Clam Customer Servi ce Information -

NOTICE!! Once used, this shelter cannot be returned to the store. If you have a
warranty claim, have your sales receipt ready and contact Clam Corporation
Customer Service by email inquiry or direct by calling:
Customer Service Hrs: - 9am to 4p

ページ2に含まれる内容の要旨

- Parts Li st - ITEM NO. PART NUMBER DESCRIPTION QTY. 1 101080 SCREW, 1/4-20 X 1.25 8 2 101081 WASHER, 1/4 FLAT 16 3 101082 NUT, 1/4-20 THIN NYLOCK 26 4 101083 TUBE SPACER CAP 8 5 101088 SCREW, 1/4-20 X 0.75 14 6 101140 SCOUT PORCH HOOP 1 7 101043 LH CANOPY BRACKET 1 8 101609 SEAT RAIL SUPPORT BRACKET 2 9 101042 RH CANOPY BRACKET 1 10 101141 SCOUT CANOPY HOOP 3 11 102494 BASE, SCOUT 08-09 1 12 101095 TOW ROPE, 3/8 DIA X 9 FT 1 13 101096 U-CHANNEL MOLDING, SCOUT 1 14 101148 SC

ページ3に含まれる内容の要旨

- Parts Di agram - 3

ページ4に含まれる内容の要旨

- Step One - 4

ページ5に含まれる内容の要旨

- Step Two - 5

ページ6に含まれる内容の要旨

- Step Three - Scout Base (p/n 102494) 6

ページ7に含まれる内容の要旨

- Step Four - 7

ページ8に含まれる内容の要旨

- St ep Five - 8

ページ9に含まれる内容の要旨

- Step Si x - 9

ページ10に含まれる内容の要旨

- Step Seven - 10

ページ11に含まれる内容の要旨

- Step Ei ght - Scout Tent (p/n 102432) 11

ページ12に含まれる内容の要旨

- Step Nine - 12

ページ13に含まれる内容の要旨

- Step Ten - If everything still looks good, secure the Molding with the #6 Phillips Screws. Evenly space them about every ten to twelve inches, and also put a screw in the center of both corners. Since there aren’ t any predrilled holes, it's advisable to use a powered driver for this operation. 13

ページ14に含まれる内容の要旨

- Set -up & Take Down - Set-Up - Rotate the hoop poles forward, then position and expand the adjustable spreader pole in the rear of the unit to take the slack out of the tent. Tighten the tension knob on the rear adjustable spreader pole to hold its position. Take-Down - Go around the shelter and tuck the tent material in between the rested hoops to keep the tent from spilling out of the base and contacting the ground. Also make sure that the tent is clear of the canopy brackets edges