Summary of the content on the page No. 1
®
AVerMedia
+
AVerDiGi EB1504 MPEG4/MPEG4
Real Time Security DVR
User Manual
http://www.avermidea.com
http://www.averdigi.com
Summary of the content on the page No. 2
FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Statement NOTE- This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
Summary of the content on the page No. 3
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION. NOTICE - INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTIEC. - THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCT ONLY.
Summary of the content on the page No. 4
Table of Contents Chapter 1 Introduction .......................................................................1 1.1 Package Contents......................................................................................2 1.2 Features and Specifications .......................................................................2 1.3 Front & Side Panel.....................................................................................3 1.4 Back Panel.............................................
Summary of the content on the page No. 5
Chapter 1 Introduction + AVerDiGi EB1504 MPEG4/MPEG4 is a 4-channel stand-alone DVR unit that provides real-time monitoring and digital recording of surveillance video. Up to four video cameras and four sensor devices can be hooked up to this DVR unit. It also provides one audio input and output channel. Surveillance, digital recording and playback are controlled through the front panel buttons. With the On-Screen-Display (OSD) menu, user can customize video recording setting, sensor and
Summary of the content on the page No. 6
▲ ▼ FN EB DVR 1 2 3 4 6 5 7 8 9 0 A-B REC ELECT E U S M N LEFT UP RIGHT ▲ FOCUS+ DOWN ZOOM+ ▼ FOCUS- ZOOM- PTZ SPEED- SPEED+ RM-H6 1.1 Package Contents (1) (3) (2) (4) (5) (6) (8) (9) (7) + (1) DVR unit (EB1504 MPEG4 or EB1504 MPEG4 unit) (2) Remote Control (batteries included) (3) Quick Installation Guide (4) Software CD (User Manual included) (5) DVR accessories (including 4 screws and 1 Ω hook) (6) Removable hard disk drawer accessories (with spare
Summary of the content on the page No. 7
Auto-detect NTSC or PAL video system Supports 2 hard drives (not included) Full-screen resolution: Display: 720 x 480 (NTSC), 720 x 576 (PAL) Recording: 720 x 480 (NTSC), 720 x 576 (PAL) Display frame rate: Total of 120/100 fps (NTSC/PAL) Recording frame rate: CIF mode: Total 120/100 fps (NTSC/PAL) D1 mode: Total 60/50fps(NTSC/PAL) Scheduled recording (00:00~23:00 set by hour ) Search for recorded videos by date/time/event + Motion detection recording (EB1504 MPEG4 Only) I
Summary of the content on the page No. 8
Name Function (4) 1/2/3/4/Quad : For ”1” : For “2” : For “3” : For “4” : For “0” If in QUAD record mode, user would not be able to view single channel in full screen i (5) Playback/OSD Menu : Use the buttons in playback mode to: Control Buttons : Display the play list and play the recorded video : Wind back the video playback at the speed of 2x, 4x, 8x or 16x : Fast play the video playback at the speed of 2x, 4x, 8x or 16x : Temporarily freeze the video play
Summary of the content on the page No. 9
1.4 Back Panel Name Function (1) Audio Out : Output the audio signal to a speaker (2) Audio In : Input the audio signal from a mic or audio output device. The audio is embedded with channel 1 (3) VGA Out : Output the video signal to a CRT or LCD monitor (4) Video Out : Output the video signal to a TV (BNC) The DVR unit support 2 video output ports and you can only select to output the video either from the VGA OUT or VIDEO OUT (5) CH1 : Input the video camera signal and dis
Summary of the content on the page No. 10
The “compatible hard disks” indicated in the above recommendation list only means that these commercially available hard disks were tested with AVerMedia products and functioned well under normal operation conditions. AVerMedia does not guarantee or provide warranties, explicitly, implied or statutory with respect to the reliability of the hard disk function or its compatibility. In no event AVerMedia shall be liable for damages, with respect to any business interruption of clients, lo
Summary of the content on the page No. 11
7. Unlock the removable hard disk 8. Remove the removable rack cover drawer then pull it out 9. Connect the power connector to the 10. Carefully insert the hard disk in the hard disk (master) removable rack then replace the removable rack cover 11. Slide the drawer back 12. Lock the removable keylock 13. You may now connect all the cables. When the power is connected, the Power LED light turns on Before removing the removable hard disk drawer, the DVR Unit must b
Summary of the content on the page No. 12
1.5.2 Connecting Devices The back panel of the DVR unit, you can connect up to 4 video cameras, 4 sensor devices, 1 alarm device and output video to a TV or CRT/LCD monitor. Connecting the unit to a PC, through USB connection, the bundled software enables you to transfer, playback and segment the video. Follow the illustration below to make the connection: TV VGA PC PC Microphone CRT/LCD Monitor Surveillance Monitor Each time you change the video display output, the power must be tur
Summary of the content on the page No. 13
1.5.3 Connecting the Sensor/Relay device The Sensor and Alarm ports enable you to connect (4) sensor inputs and (1) relay outputs. Just connect the external sensor and relay pin directly to the pinhole. Check the table below and locate which pinhole is assigned to sensor input and relay output. 1.5.3.1 I/O Card Sensor and Relay pinhole allocation: The signal from the sensor (i.e., infrared sensors, smoke detectors, proximity sensors, door sensors, etc.) is being transmitted to the uni
Summary of the content on the page No. 14
▲ ▼ ▲ 1.6 Familiarizing the Remote Control Buttons Use the Remote control to operate the OSD menu on surveillance screen. (5) FN DVR (1) (3 1 23 4 56 (2) 7 89 (4) 0 (6) (7) A-B (8) (9) (10) (11) REC (15) SELECT MENU (14) (12) LEFT UP RIGHT ▲ (13) FOCUS+ DOWN ZOOM+ ▼ - - FOCUS ZOOM PTZ SPEED- SPEED+ RM-H6 Button Function Switch to Channel 1 (1) 1 As a number key 1 Switch to Channel 2 (2) 3 As a number key 3 Switch to Channel 3 (3) 7 As a number key 7 Switch to Channel 4 (4)
Summary of the content on the page No. 15
▼ Button Function Reverse the video playback at the speed of 2x, 4x 8x or 16x (9) To move the select to left Fast play the video playback at the speed of 2x, 4x 8x or 16x (10) To move the selection to right Stop playing / Stop recording (11) To move the select to down To enter the OSD Main menu / Exit from the main menu or sub-menu (12) display To move the selection to the left and right (13) ▲ To go up and down and select the items in the menu list or change the sett
Summary of the content on the page No. 16
▲ Chapter 2 Operating the EB DVR System 2.1 Using the EB DVR System for the First Time Upon connecting the power, the unit automatically detects the status of the hard disk. The hard disk must be formatted for the first time installed on DVR system. If you are prompt to format the hard disk, press (select) for YES to format the hard disk and (menu) for NO to remain unchanged. HARD DISKS INFORMATION VERSION 1 . 5. 03 HDD CHECKING . . . MASTER HDD SIZE 76GB 509MB
Summary of the content on the page No. 17
▲ ▲ ▲ ▲ D1 (A) HDD 29% CIF(A) HDD 29% Full Screen Preview QUAD Screen Preview When you are in full screen preview, press the following buttons on the remote control and control panel to switch to different channel, or preview all 4 channels: 5 / 1 / 3 / 9 / 7 / CH2: Camera 2 QUAD: 4-Channel CH1: Camera 1 CH3: Camera 3 CH4: Camera 4 2.3 Playback the Video If the unit is recording the video, you may have to stop video recording in order to do video playback. T
Summary of the content on the page No. 18
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▼ 2. Use the and or and buttons and select SEARCH TIME. Then press or again to make the selection. 3. In the SEARCH TIME, you may now select the date and time from where you want to begin the video playback. Use the and buttons to move the selection to the left and ▲ ▼ right. Use the and or and buttons to select the date and time. Then press or again to make the selection. 4. To start video playback, the time in second must be set. Use the buttons to move the
Summary of the content on the page No. 19
Chapter 3 OSD Navigation Tree The follow figure is an OSD menu tree map. To call out the OSD menu, press on the remote control. MAIN MENU RECORD SCHEDULE RECORD SCHEDULE CAMERA SELECT 123 4 00 : 00 - 01 : 00 ALWAYS REC 13 : 00 - 14 : 00 ALWAYS REC RECORD SELECT 123 4 01 : 00 - 02 : 00 ALWAYS REC 14 : 00 - 15 : 00 ALWAYS REC RECORD MODE D1 02 : 00 - 03 : 00 ALWAYS REC 03 : 00 - 04 : 00 ALWAYS REC 15 : 00 - 16 : 00 ALWAYS REC VIDEO FORMAT MPEG4 16 : 00 - 17 : 00 ALWAYS REC 04 : 00
Summary of the content on the page No. 20
▲ 3.1 Menu Function If the unit is currently recording the video, you may have to stop video recording to change the settings. To navigate in the OSD menu, press to call up and exit ▲ ▼ from the main menu or sub-menu display. Then use the and or and buttons to go up and down and select the items in the menu list or change the settings. Use the , or button to enter sub-menu or make a selection. You can also use the and buttons to move the selection to the left and right. The red
