Aussie Vantage LP 6703T8DV31 user manual

User manual for the device Aussie Vantage LP 6703T8DV31

Device: Aussie Vantage LP 6703T8DV31
Category: Gas Grill
Manufacturer: Aussie
Size: 1.69 MB
Added : 8/29/2014
Number of pages: 36
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Aussie Vantage LP 6703T8DV31. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Aussie Vantage LP 6703T8DV31.

For your convenience

If looking through the Aussie Vantage LP 6703T8DV31 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Aussie Vantage LP 6703T8DV31 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Aussie Vantage LP 6703T8DV31 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Aussie Vantage LP 6703T8DV31 User manual - Online PDF

Explore the detailed user manual for Aussie remarkable creation, Model Vantage LP 6703T8DV31. Gain valuable insights and instructions to maximize your device's capabilities and optimize your user experience. Uncover the full potential of your Aussie Vantage LP 6703T8DV31 device through this comprehensive user manual, offering step-by-step guidance and expert tips for effortless operation and enjoyment.

Advertisement
« Page 1 of 36 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Aussie Vantage LP 6703T8DV31 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Aussie Vantage LP 6703T8DV31. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

LP Gas Grill Assembly and Use Manual
With the NEW Aussie
FLAVOR ACTIVATOR SYSTEM
(Patent Pending)
Provides:
- More even heat on the cooking surface
6703T8DV31
- Hotter temperature with the same fuel usage
6704T99K91
- Longer cooking for the same amount of fuel
6703T80K81
For Outdoor Household Use Only. Not for Commercial Use.
Need Help? Need to Register Your Grill? Looking for Aussie Parts & Accessories?
Visit us online at www.AussieGrills.com Or call Aussie Customer Service at 1-800-251-7558
WA

Summary of the content on the page No. 2

2 NOTICE Meco Corporation strives to be a quality supplier of consumer products. If we omitted any parts needed for assembly, or you need troubleshooting information, please contact us using our toll free number or visit our web site. It is important to register your grill and retain your receipt. 1-800-251-7558 Consumer Service Department 8 am - 5 pm E.S.T. Monday - Friday MECO CORPORATION 1-423-639-1171 (Telephone) 1500 Industrial Road 1-423-639-2570 (Fax) Greeneville, TN 37745 USA www.aus

Summary of the content on the page No. 3

3 Packing List When ordering parts, it is VERY important to have the complete Model Number to be assured of Description receiving the correct replacement parts for your grill. Warming Rack Cooking Grid, 3 pcs. Large Flavor Activator, see note. Small Flavor Activator, see note Left Side Shelf with Side Burner Side Burner Control Knob Hood/Body - 6703 (3-burner) OR Hood/Body - 6704 (4-burner) Right Side Shelf 6703 Flavor Activators Bottom Body Panel 3 Large - 4 small 6704 Flavor Activators Gre

Summary of the content on the page No. 4

4 Contents Packing Lists ................................................................ 3 Before Using Your Grill Installation Codes ....................................................... 15 Preparation for Assembly ..........................................4 Selecting a Location ................................................... 15 Assembly Instructions How to Perform a Leak Test ........................................ 16 Step 1 Left Leg Frame Assembly ...............................5 Ligh

Summary of the content on the page No. 5

5 Assembly Instructions Step 1 Left Leg Frame Assembly Identify Legs by hole placement and lay on floor as shown. Attach Brace between legs with four 5/32 x .31” Bolts, open side of brace facing up. Closed, flat side of brace will be flush with outside of legs. 5/32 x .31” Bolt set 4 pc Left Front leg- Note hole locations Step 2 Right Leg Frame Assembly Repeat Step 1 for Right Leg pair. Right legs are longer and have no axle hole at bottom. 5/32 x .31” Bolt set 4 pc Right Front leg- Note hole l

Summary of the content on the page No. 6

6 7 Step 3 Cart Frame Assembly Attach Left Leg Frame and Right Leg Frame to Cart Bottom Panel with eight 1/4-20 x 1.50” Bolts. Fit one Frame onto Bottom Panel at a time and insert the 1.50” bolts through the Legs into the sides of the Bottom Panel. Tighten all securely. 1/4-20 x 1.50” Bolt set 8 pc Step 4 Wheel Assembly Attach the Wheel by first inserting the Axle through the Wheel then the Axle through the Leg. Place the Washer on the end of the Axle extending out of the opposite side of th

Summary of the content on the page No. 7

7 Step 5 Steel Privacy Panel Assembly Attach the Steel Privacy Panel between the Front Legs with four 5/32” x .31” bolts through the flanges of the Panel into the threaded holes on the inside of the Legs. The bottom center of the Panel attaches to the Bottom Panel with one 5/32” x .31” bolt 5/32 x .31” Bolt set 5 pc WARNING ! To reduce the risk of serious bodily injury or death from fire or explosion: Never remove guards or devices to prevent storage of spare or oversize LP Gas Cylinders not r

Summary of the content on the page No. 8

8 CAUTION ! To reduce the risk of bodily injury from lifting, the following assembly steps #s 7 and 8 will require two people. Step 7 Hood/Body To Cart Assembly Lift the Hood/Body Assembly over the cart assembly and set it down until it rests on the top of the cart legs. Align the holes in the side of the Body with the holes in the legs. Insert two 1/4-20 x .50 Bolts through the holes in the firebox flanges (Back Left Side View) and into threaded inserts in the inside face of the back legs. Ins

Summary of the content on the page No. 9

9 CAUTION ! Prior to performing any further assembly, PERFORM “FIRST TIME USE” LEAK TEST as detailed on pages 16-17. If the grill is fully assembled before performing the First Time Use leak test, the side tables will need to be removed in order to perform the leak test on the main burner valves inside the control panel, behind the knobs, . Step 8 Side Table Assembly A. Screw two 1/4-20 x .50” Bolts into the two bottom threaded inserts on the outside of the Bowl. Do not screw Bolts all the w

Summary of the content on the page No. 10

10 Step 9 Side Burner Valve Assembly NOTE: Side Burner Valve is already attached to the regulator hose. Hose is not shown in illustration for clarity. A. Install the Side Burner Valve from underneath the LEFT Side Table. First insert the valve stem out through the hole in the bezel and fascia on the front of the side table. Next, flex the tube of the burner down and insert the nozzle into the opening in the burner tube. B. Install two 5/32” x .31” Bolts through the Control Knob Bezel and fron

Summary of the content on the page No. 11

11 Step 11 A. Side Burner Control Knob Assembly Align the flat keyed hole in the Control Knob with the keyed stem of the Side Burner Valve. Push the Control Knob onto the Side Burner Valve stem. B. Side Burner Grid Assembly Place the Side Burner Grid onto Side Burner Table, allowing the three protruded ends to fall into the three holes around the Side Burner. A B Step 12 A. Bottom Body Panel Assembly Slide the Bottom Body Panel into the guides of the Body assembly. Secure Bottom Body Panel to

Summary of the content on the page No. 12

12 CAUTION ! To reduce the risk of a laceration hazard: • Wear protective gloves when installing warming rack. Hood and Bowl edges could be sharp. Step 13 Warming Rack / Flavor Activator / Cooking Grid Assembly A. Insert Warming Rack leg ends into holes on top edge of firebox. Seat securely. B.6703 Lay a large Flavor Activator over each Burner on the lower body ridges. Lay two small Flavor Activators be- tween each large Flavor Activator. Each Flavor Activator has individual guides on the body r

Summary of the content on the page No. 13

13 Connecting/Disconnecting the Gas Using Gas DANGER ! Carbon Monoxide Hazard • This appliance can produce carbon monoxide which has no odor. Using it in an enclosed space can kill you. • Never use this appliance indoors, on recreational vehicles, or boats. WARNING ! To reduce the risk of serious bodily injury or death from fire or explosion: • Use only propane gas with this LP gas grill. • Do not attempt to convert an LP unit to natural gas. • Always use a gas appliance outdoors in an open area

Summary of the content on the page No. 14

14 LP Hose and Regulator NOTE: WARNING ! If the hose/regulator assembly is not working properly and you need a replacement, contact Customer Service To reduce the risk of serious bodily injury or death at 1-800-251-7558 or go to www.aussiegrills.com. from fire or explosion: Be sure to have the grill model number and serial • Clean and inspect the gas hose/regulator before number printed on the black label, located inside the each use of the outdoor cooking gas appliance. left door of the

Summary of the content on the page No. 15

15 Before Using Your LP Gas Grill Installation Codes WARNING ! To reduce the risk of serious bodily injury or death from fire or explosion: • This installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54 Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2 or the Standard for Recreational Vehicles, ANSI A 119.2/NFPA 1192 and CSA Z240 RV Series, recreational Vehicle C

Summary of the content on the page No. 16

16 How to Perform A Leak Test “FIRST TIME USE” and as required Supplies Needed for a Leak Test: • Clean paint brush • Water • Dish washing liquid 1. Use an LP Gas Cylinder equipped with an OPD (Overfill Prevention Device) and have it filled at an authorized LP gas dealer by a qualified attendant. 2. Make sure all grill Control Panel Knobs are turned to the “Off” position and verify that the LP Gas Cylinder valve is closed by turning the knob on the LP Gas Cylinder clockwise until it stops. 3.

Summary of the content on the page No. 17

17 6. Check for leaks by brushing the soap solution on all gas valves, hose connections and fittings. (Shown by the heavy arrows in Fig. 4, 5, and 6) Make sure you generously brush the locations with the soap solution, completely sur- rounding the connections and fittings. Fig. 5 Fig. 5a NOTE: After checking the connections and fittings in Figure 5, replace the control panel in the same manner as it was removed. Take special care to be sure the valve ends are inserted into the openings in the

Summary of the content on the page No. 18

18 Lighting the Grill Using the Pulse-Spark Ignitor WARNING ! To reduce the risk of death or serious injury from an explosion or a fire beneath the grill: • Inspect and clean Burner/Venturi Tubes for insects or insect nests. Spiders or small insects can build nests, webs, and lay eggs in the grill’s Venturi Tubes, (Fig 15, page 27) obstructing the flow of gas to the Burner. The backed-up gas can ignite behind the Control Panel and cause a fire beneath the grill, posing the risk of death or ser

Summary of the content on the page No. 19

19 5. Push the Igniter Button in until the Burner is lit. Listen for the spark ignition, and look to make sure the Burner is lit. If no spark, see Troubleshooting Section on page 30. 3/16” gap Gas Collector Box - If no spark, pinch together or open Gas Collector Box to adjust 3/16” gap between electrode tip and V-notch. Fig. 10 6. From the “Off” position, light all other Burners from left to right, making sure each Burner is lit before lighting the next. Your grill has a Crossover Ignition

Summary of the content on the page No. 20

20 Manually Lighting the Grill WARNING ! To reduce the risk of serious bodily injury or death from fire or explosion: • Open Hood before lighting the grill to prevent an explosion from gas build-up. 1. Open the Hood. 2. IMPORTANT: Make sure Control Knobs are turned “Off.” (Fig. 7 - P.18) 3. Turn the LP Gas Cylinder valve open counterclockwise until it stops. (Fig. 8- P.18) 4. Locate either the left or right match-lighting hole you intend to use underneath the Grill Bowl. Push in and turn either


Alternative user manuals
# User manual Category Download
1 Aussie 8362 User manual Gas Grill 2
2 Aussie Vantage LP Gass Grill 6804T80SS1 User manual Gas Grill 1
3 Aussie BONZA 3 ELITE User manual Gas Grill 3
4 Aussie Vantage LP 6703C8FKK1 User manual Gas Grill 2
5 Aussie 6T01U00SS1 User manual Gas Grill 1
6 Aussie Bonza User manual Gas Grill 1
7 Aussie Joey 7110.7.641 User manual Gas Grill 2
8 Aussie LP 7462 User manual Gas Grill 1
9 Aussie Vantage LP 6804S8-S11 User manual Gas Grill 3
10 Aussie MECO 7110 User manual Gas Grill 0
11 Aussie VANTAGE 6122S8X641 User manual Gas Grill 0
12 Aussie VANTAGE 6112S8X641 User manual Gas Grill 1
13 Aussie pmn User manual Gas Grill 2
14 Aussie VANTAGE 6804 User manual Gas Grill 2
15 Aussie VANTAGE 6805 User manual Gas Grill 2
16 12Volt Olympus Visera PEF-V User manual Gas Grill 6
17 2JANE iPAQ Mobile Media Companion rz1715 User manual Gas Grill 3
18 2JANE Tektronix Upgrade Kit Z340FX User manual Gas Grill 1
19 2nd Ave. DVD-V7200 User manual Gas Grill 0
20 2nd Ave. Canon imageRUNNER 0023W934 User manual Gas Grill 1