Instrukcja obsługi Canon IP ReadyTM Series Video Alarm FDW75C12N

Instrukcja obsługi dla urządzenia Canon IP ReadyTM Series Video Alarm FDW75C12N

Urządzenie: Canon IP ReadyTM Series Video Alarm FDW75C12N
Rozmiar: 2,03 MB
Data dodania: 2013-11-16 17:28:04
Liczba stron: 24
Drukuj instrukcję

Pobierz

Jak korzystać?

Naszym celem jest zapewnienie Ci jak najszybszego dostępu do treści zawartych w instrukcji obsługi urządzenia Canon IP ReadyTM Series Video Alarm FDW75C12N. Korzystając z podglądu online możesz szybko przejrzeć spis treści i przejść do strony, na której znajdziesz rozwiązanie swojego problemu z Canon IP ReadyTM Series Video Alarm FDW75C12N.

Dla Twojej wygody

Jeżeli przeglądanie instrukcji Canon IP ReadyTM Series Video Alarm FDW75C12N bezpośrednio na tej stornie nie jest dla Ciebie wygodne, możesz skorzystać z dwóch możliwych rozwiązań:

  • Przeglądanie pełnoekranowe - Aby wygodnie przeglądać instrukcję (bez pobierania jej na komputer) możesz wykorzystać tryp przeglądania pełnoekranowego. Aby uruchomić przeglądanie instrukcji Canon IP ReadyTM Series Video Alarm FDW75C12N na pełnym ekranie, użyj przycisku Pełny ekran.
  • Pobranie na komputer - Możesz również pobrać instrukcję Canon IP ReadyTM Series Video Alarm FDW75C12N na swój komputer i zachować ją w swoich zbiorach. Jeżeli nie chcesz jednak marnować miejsca na swoim urządzeniu, zawsze możesz pobrać ją w przyszłości z ManualsBase.
Instrukcja obsługi Canon IP ReadyTM Series Video Alarm FDW75C12N
Advertisement
« Page 1 of 24 »
Advertisement
Wersja drukowana

Wiele osób woli czytać dokumenty nie na ekranie, lecz w wersji drukowanej. Opcja wydruku instrukcji również została przewidziana i możesz z niej skorzystać klikając w link znajdujący się powyżej - Drukuj instrukcję. Nie musisz drukować całej instrukcji Canon IP ReadyTM Series Video Alarm FDW75C12N a jedynie wybrane strony. Szanuj papier.

Streszczenia

Poniżej znajdziesz zajawki treści znajdujących się na kolejnych stronach instrukcji do Canon IP ReadyTM Series Video Alarm FDW75C12N. Jeżeli chcesz szybko przejrzeć zawartość stron znajdujących się na kolejnych strinach instrukcji, możesz z nich skorzystać.

Streszczenia treści
Streszczenie treści zawartej na stronie nr. 1

Product
Instructions

IP Ready Series
FDW75C12N & FDP75C12N
Before attempting to connect or operate this product,
please read these instructions completely.
81-IN5329
04/28/06
-  -

Streszczenie treści zawartej na stronie nr. 2

i MPo Rtant saf EGua RDs saf Et Y PRECautions 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. Caution 2. Retain Instructions - The safety and operating instructions should be retained Risk of for future reference. El ECt Ri C s ho Ck! ! 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions - All operating & user

Streszczenie treści zawartej na stronie nr. 3

FDW75C12N, FDP75C12N ASSEMBLING THE UNIT: IP Ready Network Housing Remove content from all boxes. Contents should include: IP Ready Network Housing with 12Vdc input, wall mount or pendant mounting, heater & blowers, ready for standard IP PTZ cameras. ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY): Power 12Vdc, Class 2 Only ! Total Power: 21 watts Housing only Accessories (Heater/Blower): 21 watts Heater: 20 watts Blower: 1 watt NOTE: This unit is designed for operation in an upr

Streszczenie treści zawartej na stronie nr. 4

INSTALLATION OF PTZ CAMERA See model for specific instruction. Listed on the following pages are the specific instructions for each of the individual network cameras. See specific instruction for the model that matches the unit you have. INDEX OF CAMERAS AXIS 213 5 AXIS 214 6 CANON VB-C10R 7 CANON VB-C50iR 8 CANON VC-C4R / VC-C50iR 9 ELMO PTC-200C 10 ELMO PTC-201 11 ELMO PTC-400C 12 ELMO PTC-401 13 JVC VN-C30U 14 PANASONIC BB-HCM381 / KX-HMC280 15 PIXORD 261 / 262 16 SONY SNCRZ30 17 SONY SN

Streszczenie treści zawartej na stronie nr. 5

INSTALLING QUICK RELEASE BRACKETS AXIS 213 2539 Mounting Plate: Attach camera using these (2) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 1" 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. Captive Screw 2" 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lock

Streszczenie treści zawartej na stronie nr. 6

INSTALLING QUICK RELEASE BRACKETS AXIS 214 2685 Mounting Plate: Attach camera using these (3) holes 3. Place (3) 8 x 32 x s Phillips head screws on the top 2" of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. 1. Install the AXIS 214 camera to the 2685 mounting plate using the (3) 3mm x 12mm bolt and lock wash

Streszczenie treści zawartej na stronie nr. 7

INSTALLING QUICK RELEASE BRACKETS CANON VB-C10R 2539 Mounting Plate: Attach camera using these (2) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 1" 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. Captive Screw 2" 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and

Streszczenie treści zawartej na stronie nr. 8

INSTALLING QUICK RELEASE BRACKETS CANON VB-C50iR 2539 Mounting Plate: Attach camera using these (2) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 1" 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. Captive Screw 2" 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws an

Streszczenie treści zawartej na stronie nr. 9

INSTALLING QUICK RELEASE BRACKETS CANON VC-C4R / VC-C50iR 2539 Mounting Plate: Attach camera using these (2) holes 1" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 1" 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. Captive Screw 2" 1. Install the camera to the 2539 mounting plate using (2) 10-32

Streszczenie treści zawartej na stronie nr. 10

INSTALLING QUICK RELEASE BRACKETS ELMO PTC-200C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes ½" 1" 2. The Elmo PTC-200C camera requires 3.5" of spacing for optimal position within the housing. Use (4) 2" spacer(s), plus (4) 1" spacer(s) and (4) ½" spacer(s) provided in the (2) hardware packets. 2" 1. Place the camera onto the quick release b

Streszczenie treści zawartej na stronie nr. 11

INSTALLING QUICK RELEASE BRACKETS ELMO PTC-201 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes ½" 2. The Elmo PTC-201 camera requires 2½" of spacing for optimal position within the housing. Use (4) 2" spacer(s) plus (4) ½" spacer(s) provided in the (2) hardware 2" packets. 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer a

Streszczenie treści zawartej na stronie nr. 12

INSTALLING QUICK RELEASE BRACKETS ELMO PTC-400C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes ½" 1" 2. The Elmo PTC-400C camera requires 3.5" of spacing for optimal position within the housing. Use (4) 2" spacer(s), plus (4) 1" spacer(s) and (4) ½" spacer(s) provided in the (2) hardware packets. 3. Place (3) 8 x 32 x s Phillips head screws on

Streszczenie treści zawartej na stronie nr. 13

INSTALLING QUICK RELEASE BRACKETS ELMO PTC-401 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes 1" 2. In the packet, there will be a number of 2 inch and 1 inch spacers. Take four of the 1 inch spacers and screw them onto the spacers that are on the base bracket (to make a 3 inch spacer). Place two 8/32 X s Philips head screws on the three inc

Streszczenie treści zawartej na stronie nr. 14

INSTALLING QUICK RELEASE BRACKETS JVC VN-C30U 2539 Mounting Plate: Attach camera using these (3) holes ½" 2. In the packet, there will be a number of 2 inch and ½ inch spacers. Take four of the ½ inch spacers and screw them onto the spacers that are on the base 2" bracket (to make a 2½ inch spacer). Place two 8/32 X s Philips head screws on the two and a half inch spacer in the dome. Be sure to place the screws so they line up with the two open screw slots on the quick release bracket

Streszczenie treści zawartej na stronie nr. 15

INSTALLING QUICK RELEASE BRACKETS PANASONIC BB-HCM381 / KX-HMC280 2539 Mounting Plate: Attach camera using this hole ½" 1" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 2" 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. 1. Install the camera to the 2539 mounting plate using the ¼ x 20, washer and

Streszczenie treści zawartej na stronie nr. 16

INSTALLING QUICK RELEASE BRACKETS PIXORD 261 / 262 2630 Mounting Plate: Attach camera using these (3) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. 1. Install the camera to the 2630 mounting plate using the (3) 8 x 32 x .5 flat head screws,

Streszczenie treści zawartej na stronie nr. 17

INSTALLING QUICK RELEASE BRACKETS SONY SNCRZ30 2539 Mounting Plate: Attach camera using this hole 2" 2. The SNCRZ30 require 2” of spacing to properly position the camera within the housing. Use (4) 2” spacers provided in the hardware packets. 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 4. Slide the mounting plate with camera into position on top of spacer

Streszczenie treści zawartej na stronie nr. 18

INSTALLING QUICK RELEASE BRACKETS SONY SNCRZ50 2539 Mounting Plate: Attach camera using this hole ½" 2" 2. The SONY SNCRZ50 require 2 ½ ” of spacing to properly position the camera within the housing. Use (4) 2” spacers plus (4) ½ “ spacers provided in the hardware packet. 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 4. Slide the mounting plate with camera

Streszczenie treści zawartej na stronie nr. 19

INSTALLING QUICK RELEASE BRACKETS TOSHIBA IK-WB21A 2539 Mounting Plate: Attach camera using these (4) holes 1" 2" 2. The Toshiba 1K-WB21A requires 3” of spacing to properly position the camera within the housing. Use (4) 2” spacers plus (4) 1” spacers provided in the hardware packets. 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 4. Slide the mounting plat

Streszczenie treści zawartej na stronie nr. 20

INSTALLING THE HOUSING ASSEMBLY: WIRING INSTRUCTIONS Be sure the bracket is properly and securely mounted RJ45 to a supporting structure capable of rigidly holding ! the weight of the entire unit. BNC NOTE: This unit is designed for operation in an upright position. Installing the housing (Large) upside down may cause damage to Power the internal equipment, and will void the warranty. (Small) Alarms INSTALLING PENDANT MOUNT 1. This unit includes a 1½" NPT housing for a standard 1½"


Podobne instrukcje
# Instrukcja obsługi Kategoria Pobierz
1 Canon Home Security System 2.1 Home Security System 25
2 Canon Vb-C50fi Home Security System 12
3 Canon Home Security System VC-C50IR Home Security System 37
4 Canon WFT-E2 II Home Security System 21
5 Canon IP ReadyTM Series Video Alarm FDP75C12N Home Security System 37