Streszczenie treści zawartej na stronie nr. 1
Product
Instructions
™
IP Ready Series
FDW75C12N & FDP75C12N
Before attempting to connect or operate this product,
please read these instructions completely.
81-IN5329
04/28/06
- -
Streszczenie treści zawartej na stronie nr. 2
i MPo Rtant saf EGua RDs saf Et Y PRECautions 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. Caution 2. Retain Instructions - The safety and operating instructions should be retained Risk of for future reference. El ECt Ri C s ho Ck! ! 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions - All operating & user
Streszczenie treści zawartej na stronie nr. 3
FDW75C12N, FDP75C12N ASSEMBLING THE UNIT: IP Ready Network Housing Remove content from all boxes. Contents should include: IP Ready Network Housing with 12Vdc input, wall mount or pendant mounting, heater & blowers, ready for standard IP PTZ cameras. ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY): Power 12Vdc, Class 2 Only ! Total Power: 21 watts Housing only Accessories (Heater/Blower): 21 watts Heater: 20 watts Blower: 1 watt NOTE: This unit is designed for operation in an upr
Streszczenie treści zawartej na stronie nr. 4
INSTALLATION OF PTZ CAMERA See model for specific instruction. Listed on the following pages are the specific instructions for each of the individual network cameras. See specific instruction for the model that matches the unit you have. INDEX OF CAMERAS AXIS 213 5 AXIS 214 6 CANON VB-C10R 7 CANON VB-C50iR 8 CANON VC-C4R / VC-C50iR 9 ELMO PTC-200C 10 ELMO PTC-201 11 ELMO PTC-400C 12 ELMO PTC-401 13 JVC VN-C30U 14 PANASONIC BB-HCM381 / KX-HMC280 15 PIXORD 261 / 262 16 SONY SNCRZ30 17 SONY SN
Streszczenie treści zawartej na stronie nr. 5
INSTALLING QUICK RELEASE BRACKETS AXIS 213 2539 Mounting Plate: Attach camera using these (2) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 1" 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. Captive Screw 2" 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lock
Streszczenie treści zawartej na stronie nr. 6
INSTALLING QUICK RELEASE BRACKETS AXIS 214 2685 Mounting Plate: Attach camera using these (3) holes 3. Place (3) 8 x 32 x s Phillips head screws on the top 2" of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. 1. Install the AXIS 214 camera to the 2685 mounting plate using the (3) 3mm x 12mm bolt and lock wash
Streszczenie treści zawartej na stronie nr. 7
INSTALLING QUICK RELEASE BRACKETS CANON VB-C10R 2539 Mounting Plate: Attach camera using these (2) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 1" 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. Captive Screw 2" 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and
Streszczenie treści zawartej na stronie nr. 8
INSTALLING QUICK RELEASE BRACKETS CANON VB-C50iR 2539 Mounting Plate: Attach camera using these (2) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 1" 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. Captive Screw 2" 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws an
Streszczenie treści zawartej na stronie nr. 9
INSTALLING QUICK RELEASE BRACKETS CANON VC-C4R / VC-C50iR 2539 Mounting Plate: Attach camera using these (2) holes 1" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 1" 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. Captive Screw 2" 1. Install the camera to the 2539 mounting plate using (2) 10-32
Streszczenie treści zawartej na stronie nr. 10
INSTALLING QUICK RELEASE BRACKETS ELMO PTC-200C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes ½" 1" 2. The Elmo PTC-200C camera requires 3.5" of spacing for optimal position within the housing. Use (4) 2" spacer(s), plus (4) 1" spacer(s) and (4) ½" spacer(s) provided in the (2) hardware packets. 2" 1. Place the camera onto the quick release b
Streszczenie treści zawartej na stronie nr. 11
INSTALLING QUICK RELEASE BRACKETS ELMO PTC-201 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes ½" 2. The Elmo PTC-201 camera requires 2½" of spacing for optimal position within the housing. Use (4) 2" spacer(s) plus (4) ½" spacer(s) provided in the (2) hardware 2" packets. 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer a
Streszczenie treści zawartej na stronie nr. 12
INSTALLING QUICK RELEASE BRACKETS ELMO PTC-400C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes ½" 1" 2. The Elmo PTC-400C camera requires 3.5" of spacing for optimal position within the housing. Use (4) 2" spacer(s), plus (4) 1" spacer(s) and (4) ½" spacer(s) provided in the (2) hardware packets. 3. Place (3) 8 x 32 x s Phillips head screws on
Streszczenie treści zawartej na stronie nr. 13
INSTALLING QUICK RELEASE BRACKETS ELMO PTC-401 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes 1" 2. In the packet, there will be a number of 2 inch and 1 inch spacers. Take four of the 1 inch spacers and screw them onto the spacers that are on the base bracket (to make a 3 inch spacer). Place two 8/32 X s Philips head screws on the three inc
Streszczenie treści zawartej na stronie nr. 14
INSTALLING QUICK RELEASE BRACKETS JVC VN-C30U 2539 Mounting Plate: Attach camera using these (3) holes ½" 2. In the packet, there will be a number of 2 inch and ½ inch spacers. Take four of the ½ inch spacers and screw them onto the spacers that are on the base 2" bracket (to make a 2½ inch spacer). Place two 8/32 X s Philips head screws on the two and a half inch spacer in the dome. Be sure to place the screws so they line up with the two open screw slots on the quick release bracket
Streszczenie treści zawartej na stronie nr. 15
INSTALLING QUICK RELEASE BRACKETS PANASONIC BB-HCM381 / KX-HMC280 2539 Mounting Plate: Attach camera using this hole ½" 1" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 2" 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. 1. Install the camera to the 2539 mounting plate using the ¼ x 20, washer and
Streszczenie treści zawartej na stronie nr. 16
INSTALLING QUICK RELEASE BRACKETS PIXORD 261 / 262 2630 Mounting Plate: Attach camera using these (3) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 4. Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener. 1. Install the camera to the 2630 mounting plate using the (3) 8 x 32 x .5 flat head screws,
Streszczenie treści zawartej na stronie nr. 17
INSTALLING QUICK RELEASE BRACKETS SONY SNCRZ30 2539 Mounting Plate: Attach camera using this hole 2" 2. The SNCRZ30 require 2” of spacing to properly position the camera within the housing. Use (4) 2” spacers provided in the hardware packets. 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 4. Slide the mounting plate with camera into position on top of spacer
Streszczenie treści zawartej na stronie nr. 18
INSTALLING QUICK RELEASE BRACKETS SONY SNCRZ50 2539 Mounting Plate: Attach camera using this hole ½" 2" 2. The SONY SNCRZ50 require 2 ½ ” of spacing to properly position the camera within the housing. Use (4) 2” spacers plus (4) ½ “ spacers provided in the hardware packet. 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 4. Slide the mounting plate with camera
Streszczenie treści zawartej na stronie nr. 19
INSTALLING QUICK RELEASE BRACKETS TOSHIBA IK-WB21A 2539 Mounting Plate: Attach camera using these (4) holes 1" 2" 2. The Toshiba 1K-WB21A requires 3” of spacing to properly position the camera within the housing. Use (4) 2” spacers plus (4) 1” spacers provided in the hardware packets. 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate. 4. Slide the mounting plat
Streszczenie treści zawartej na stronie nr. 20
INSTALLING THE HOUSING ASSEMBLY: WIRING INSTRUCTIONS Be sure the bracket is properly and securely mounted RJ45 to a supporting structure capable of rigidly holding ! the weight of the entire unit. BNC NOTE: This unit is designed for operation in an upright position. Installing the housing (Large) upside down may cause damage to Power the internal equipment, and will void the warranty. (Small) Alarms INSTALLING PENDANT MOUNT 1. This unit includes a 1½" NPT housing for a standard 1½"
