Streszczenie treści zawartej na stronie nr. 1
0311 A OI
GT-1C-L/GT-1C
Apartment Intercom System
Residential Monitor Station
OPERATION MANUAL
Streszczenie treści zawartej na stronie nr. 2
PRECAUTIONS General Prohibitions Prohibition to Dismantle the Unit Prohibition on Subjecting the Unit to Water General Precautions WARNING General Precautions 1. Keep the unit more than 1 m away from radio or TV set. (Negligence could result in death or serious injury.) 2. This unit is for indoor use only. Do not use outdoors. 1. Do not dismantle or alter the unit. Fire or electric shock could result. 3. In areas where broadcasting station antennas are close by, intercom system may be af- 2.
Streszczenie treści zawartej na stronie nr. 3
- 3 -
Streszczenie treści zawartej na stronie nr. 4
NAMES 1 Screen brightness control Color LCD video monitor 0 10 Speaker Adjust the LCD screen brightness. Hearing aid T-mode *1 compatibility symbol (GT-1C-L only) Receive volume control*5 0 10 ADJUST button Adjust the receive volume during communication. ZOOM/WIDE button At 0 , no sound is output. Call tone volume Pan/tilt button STATUS LED (orange)*2 0 10 Indicated with Adjust the call tone volume. TONE OFF LED (orange)*3 button symbols. At 0 , no sound is output. Micro
Streszczenie treści zawartej na stronie nr. 5
RECEIVING CALLS 2 2-1 Answering a call 1 When a call is received from an entrance station or security guard sta- 3 When you are done talking, press and hold down the [ OFF] button. tion, a call tone will sound and the STATUS LED flashes. If the station The STATUS LED will go off. has a camera, a picture will be displayed on the monitor. 2 Press the [ TALK] button once, and after the beep, communicate hands-free. Hands-free communication starts when the STATUS LED switches from blinking to s
Streszczenie treści zawartej na stronie nr. 6
2-3 Door release 1 Press the [ ] button while in communication with the entrance sta- 2 Door release is activated at the entrance station. tion. • If the station has a camera, the door release will also activate during calling. Depending on the electric door release system that you use, door re- lease may be active only while the door release button is pressed. 2-4 Light control Turning the entrance light on (when light is installed in common area) 2 The outside light at the entrance will only
Streszczenie treści zawartej na stronie nr. 7
CALLING 3 3-1 Calling security guard stations 1 In the standby mode, pressing the [ GUARD] button will make the 2 A tone will sound at the security guard station. STATUS LED flash and a call confirmation tone will sound. • The in use LED (orange) at all of the connected entrance stations will light up. • If there is no answer, a call record will be stored in the security guard sta- tion, and notification of the call will be sent to the security guard. MONITORING 4 1 In the standby mode, press t
Streszczenie treści zawartej na stronie nr. 8
OPERATION DURING COMMUNICATION AND MONITORING 5 5-1 ZOOM/WIDE switching 1 Press the [ ZOOM/WIDE] button when a picture is displayed. • Switching between [zoom] [wide] occurs each time the button is pressed. [Wide picture] [Zoom picture] NOTES: When the caller is not shown in the center of the picture, the zoom picture can be moved up, down, left, and right. (Refer to section 5-2.) The wide picture may be distorted in comparison with the zoom picture due to the characteristics of the camer
Streszczenie treści zawartej na stronie nr. 9
Night illumination 5-3 At night, the illuminator LED lights up during an entrance station call. It can also be made to light up at night when the entrance is being monitored. When a call is made from the entrance station When monitoring is performed 1 If the CALL button of the entrance station is pressed, the illuminator 1 Pressing the [ ] button will make the illuminator LED light up. LED will light up. the illuminator LED will light up. 2 When communication ends, the illuminator LED will g
Streszczenie treści zawartej na stronie nr. 10
ALARMS AND RELATED INFO. 6 6-1 OPTION button Pressing the [ OPTION] button allows for operation of connected units to be performed such as turning lights on and off. 6-2 Emergency alarm 1 Press and lock the emergency alarm switch (or when there is a line - 4 Press the [ TALK] button to communicate with the security guard off trouble). station. The STATUS LED will light up. After communication, the emergency alarm will begin to sound again. ALARM ACTIVATED. 2 An alarm will sound from the res
Streszczenie treści zawartej na stronie nr. 11
CHANGING SETTINGS 7 7-1 CALL TONE switching 1 In the standby mode, press and hold the [ ] button for 1 second or more while pressing the [ TALK] button. • Each time the call tone is switched, the tone sounds one time for confirmation. • The call tone can be set to be either high-pitched or low-pitched. • All of the call tones, including those for entrance stations, security guard stations, and doorbells, will change. TECHNICAL PRECAUTIONS 8 • Operating temperature: 0°C to +40°C (+32°F to
Streszczenie treści zawartej na stronie nr. 12
Aiphone warrants that its products have no material or workmanship defects under normal use conditions for two years after delivery to the end user. Aiphone will perform repair or replacement free of charge if the product is defective and the warranty applies to the defect. Aiphone reserves unto itself the sole right to make the final decision whether there is a defect in materials and/or workmanship and whether or not the product is under warranty. This warranty shall not apply to any Aiphone
