Summary of the content on the page No. 1
16" (406 mm) MODEL UM40lDW
Convertlble Rear Bag I Mulching With Charger
INSTRUCTION MANUAL
SPECIFICATIONS
Model UMlOlD
Effective cutting width No load Speed fRPM1 Voltage Dimensions IL x W x HI I Net weight
51 3/4" x 19" x 39 314
16" (406 mm) 3.800
24v I1 316 mm x 482 mm x 1 010 mml 70 Ibs 13' kgl
Input output Charging time
AC 120V60Hz DC 24V Approx 4 Hrs
Manufacturer reserves the right to change speclfications without notice
II Note SDecifications mav differ from countrv to countrv
Summary of the content on the page No. 2
IMPORTANT SAFETY INSTRUCTIONS (For Gardening Appliances) WARNING: WHEN USING CORDLESS TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: SAVE THESE INSTRUCTIONS. READ ALL INSTRUCTIONS. 1. Avoid Dangerous Environment - Don't use appliances in damp or wet locations. 2. Don't Use In Rain. 3. Keep Children Away - All visitors should be kept at a distance from work area. 4. Dress Properly - D
Summary of the content on the page No. 3
damaged, have it repaired by an authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease. 16. Remove Adjusting Wrenches. Form habit of checking to see that adjusting wrenches are removed from mower before turning it on. 17. Check Damaged Parts - Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform it
Summary of the content on the page No. 4
111 1 Inspect for damage. IV) Repair any damage before restarting and operating the lawn mower. 30. CHECK THE REAR BAG FREQUENTLY FOR WEAR OR DETERIORATION. For storage, always make sure the rear bag is empty. Replace a worn bag with a new factory replacement bag for safety. Order Part No. 1660459 31. Stop the motor and remove key whenever you leave the equipment, before cleaning the mower housing, and before making any repairs or inspections. 32. Mow across the face of slopes, never up a
Summary of the content on the page No. 5
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERIES & CHARGER I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger and (2) product using battery. 3. CAUTION - To reduce risk of injury, charge ONLY MAKITA type rechargeable batteries used in Model UM401D. Other types of batteries may burst causing personal injury and damage. 4. Do not
Summary of the content on the page No. 6
ADDITIONAL SAFETY RULES FOR BATTERIES IN MOWER 1. Use ONLY the Makita charger Model DC240 specified to charge the Makita model UM4OlD. 2. Do not short the battery: 1) Do not touch the charging inlet with any conductive material. 2) Shut the cover on the charging inlet when not charging. 3) Do not expose mower to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. 3. Do not leave mower exposed to direct sunlight. Do not store
Summary of the content on the page No. 7
ADDITIONAL SAFETY RULES FOR CHARGER 1. The Makita charger Model DC240 is specifically designed to charge only the Makita batteries used in Model UM401D. Do not attempt to charge any other battery with this charger. 2. Handle the charger carefully. Do not drop or strike it. 3. Never carry the charger by cord or yank it to disconnect from receptacle. 4. Keep cord from heat, oil, chemicals, and sharp edges. 5. Use only a power source of the same voltage as indicated on the nameplate of the
Summary of the content on the page No. 8
Unpacking Your mower has been completely assembled at the factory except for the rear bag. 1. Remove the rear bag, instruction manual, charger and plastic bag containing acces- sories from the carton. 2. Remove the mower from the carton and place all four wheels on the ground or, floor. 3. Check the carton thoroughly and make sure there are no loose parts. 4. To unfold the handle, raise it into place. Fit the protrusion of the handle into one of the square holes in left and right sides of
Summary of the content on the page No. 9
NOTE *If the charging light flashes in green color, the charging plug may not be inserted into the charging inlet correctly Check the charging plug and charging inlet *If the charging light flashes in red color the batteries are too weak for normal charging Wait for a while until normal charging starts after recovery charging is finished *If the mower has not been used for long periods. it will take more than specified time to charge the mower *If the mower is left uncharged for more than
Summary of the content on the page No. 10
Wheel height adjustment (six steps between 1 " and 3-1/2" or 25 mm and 89 mm). 1. Turn off the interlock switch and remove the key. If you are recharging the mower, stop recharging and disconnect the charging plug. 2. Push the lever outward and fit it into one of the grooves for your desired cutting height. This one touch wheel height adjustment system can adjust all four wheels at the same time. CAUTIO N : Always make sure that the lever is fit in the groove properly before operation
Summary of the content on the page No. 11
WARN I NG : Replace bent or damaged blade immediately. A bent or damaged blade may cause exces- sive vibration, resulting in damage to the mower or serious injury to operator. Blade sharpening Keep the blade sharp and clean for best performance. A dull blade does not cut grass cleanly and evenly. It may overload the motor and waste more battery energy 1. Turn off the interlock switch and remove File or sharpening store the key. If you are recharging the 7 mower, stop recharging and dis
Summary of the content on the page No. 12
Emptying rear bag 1. Release the switch lever. 2. Turn off the interlock switch and remove the key 3. Open the rear guard. 4. Hold the rear bag handle and remove the rear bag from the mower. 5. Empty the grass from the rear bag. Rear guard - Rear bag WARNING: To reduce risk of injury, inspect rear bag frequently and replace with recommended replacement if there are signs for wear or deterioration. Installing mulching plate 1. Turn off the interlock switch and remove the key. If you a
Summary of the content on the page No. 13
Mulching While mulching, your new mower is designed to cut the grass clipptngs into small pieces and distribute them back into the lawn. Under normal conditions, the mulched grass will biodegrade quickly to provide nutrients to the lawn. Please review the following recommendations for optimum mulching performance. 1. Avoid mowing when the grass is wet from rain or dew. Wet grass may from clumps which interfere with the mulching action and reduce run-time. The best time to mow grass is in
Summary of the content on the page No. 14
4 Pull the switch lever toward you while depressing the switch button 5 Release the switch button as soon as the motor starts running The mower will con- tinue to run until you release the switch lever 6 The indicator indicates remaining capacity of the battery only when the motor is run- ning 7 Release the switch lever to stop the motor 8 When not in use, turn off the interlock switch and remove the key Store the key in a safe place out of reach of children Overload protector This mowe
Summary of the content on the page No. 15
Maintenance & Storage 1. REMOVE KEY. Store it in a safe place out of the reach of children. 2. Clean your mower using only mild soap and a damp cloth. Do not spray or pour water on your mower when cleaning. 3. Turn mower on its side and clean grass clippings that have accumulated on the under- side of mower deck. 4. Check all nuts, bolts, knobs, screws, fasteners, etc. for tightness. 5. Inspect moving parts for damage, breakage, and wear. Have repairs made on any dam- aged or missing par
Summary of the content on the page No. 16
ACCESSORIES CAUTION These accessories or attachments are recommended for use with your Makita tool specified in this manual The use of any other accessories or attachments might present a risk of injury to persons The accessories or attachments should be used only in the proper and intended manner *Swing arm blade *Charger Model DC240 Pan No. 72901 1-5 *Mulching plate *Socket wrench 13 Part No. 416211-1 Pan No. 782226-3 *Wrench 32 Part No. 781 028-4 16
Summary of the content on the page No. 17
Dec-19-'96 US 16" (406 mm) CORDLESS LAWN MOWER Model UM401DW 17
Summary of the content on the page No. 18
Note: The switch and other part configurations may differ from country to country. 18
Summary of the content on the page No. 19
MODEL UM4OlDW Dec-19- 96 US izD DESCRIPTION MXE MACHINE ~ 58 1 Torsion Spr8ng 20 112 Tapping Screw 41 I8 CDWhng Complete 59 1 LeVOI 60 1 Thin Washer 15 Tapping Screw Flange 4x25 1 Tapping Screw 4r 18 61 Stop Ring E ~ I2 Flat Washer 4 62 1 Insulalmn Label 51 I 61 TenSlOn Sprlnp 12 63 ComDreSrlon SD"ng 16 74 Her Lock Nul M6- IO 64 1 Switch Bunon 1 Tension Spring 5 81 Deck 65 91 Rear Shall 66 1 Switch 2 Flat Washer IO 67 1 Switch 801 Cover IO 68 2 Tapping Screw 4~18 11 2 Flat
Summary of the content on the page No. 20
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanshlp and materials for the period of ONE YEAR from the date of originid purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or mater
